cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
399 Views
Registered: ‎02-06-2020

Zynq UltraScale+ MPSoC for the Hardware Designer lab files

Jump to solution

I am going through Zynq UltraScale+ MPSoC for the Hardware Designer courses from Xilinx Training Center. At the end of each course there is a lab. Each lab assumes to use prepared files for illustration. However there is no attached lab files, just a link to the guide. Am I missing something in how it is supposed to work? Are these lab files at the different directory I just don’t see?

1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
339 Views
Registered: ‎03-25-2019

Hi @ar2019,

You can find all the labs files in the following link:

     https://www.xilinx.com/training/downloads.html

For the "Zynq UltraScale+ MPSoC for the Hardware Designer", here it is the link:

     https://www.xilinx.com/training/downloads.html#embdzuphw

Best regards,
Abdallah
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution

View solution in original post

6 Replies
Highlighted
Moderator
Moderator
340 Views
Registered: ‎03-25-2019

Hi @ar2019,

You can find all the labs files in the following link:

     https://www.xilinx.com/training/downloads.html

For the "Zynq UltraScale+ MPSoC for the Hardware Designer", here it is the link:

     https://www.xilinx.com/training/downloads.html#embdzuphw

Best regards,
Abdallah
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution

View solution in original post

Highlighted
Contributor
Contributor
336 Views
Registered: ‎02-06-2020

Thank you. Perfect timing!

Highlighted
Moderator
Moderator
328 Views
Registered: ‎03-25-2019

You are welcome!

Best regards,
Abdallah
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
Highlighted
Contributor
Contributor
279 Views
Registered: ‎02-06-2020

I decided to add another question here since it is related to original topic. 

The Xilinx courses (Embedded Systems design as an example) talk about new tools (Vitis in SDK Drive course and it include lab). But all labs are till 2019.1 which is still SDK. Are there newer versions? 

0 Kudos
Highlighted
Moderator
Moderator
259 Views
Registered: ‎03-25-2019

Hi  @ar2019,

As there is no 2019.2 lab for the "Embedded Systems Design" in the provided link, so you won't find it else where.

If you are interested in a Vitis lab you may want to check "Migrating to the Vitis Embedded Software Development IDE Workshop".

Best regards,
Abdallah
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
Highlighted
Contributor
Contributor
224 Views
Registered: ‎02-06-2020
That's too bad.
Thank you.
0 Kudos