UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor gpguizzo
Visitor
162 Views
Registered: ‎12-24-2018

hw_server Warning: Cannot create '3000:arm' GDB server

Jump to solution

Hello,

up until today I have been successfully programming and debugging my AC701 evaluation board through its integrated usb port. Now I can't seem to see the board anymore when I open hardware manager. The board is directly connected to the machine running Vivado through a USB cable (which I already checked to be working).

When hw_server launches, this warning appears:

 

INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
INFO: [Labtools 27-2222] Launching hw_server...
INFO: [Labtools 27-2221] Launch Output:

****** Xilinx hw_server v2018.3
  **** Build date : Dec  7 2018-00:40:27
    ** Copyright 1986-2018 Xilinx, Inc. All Rights Reserved.

Warning: Cannot create '3000:arm' GDB server: Tentativo di accesso al socket con modalità non consentite dalle rispettive autorizzazioni di accesso

Sorry for the non-english part of the warning, which roughly translates to: trying to access socket with modes not allowed by access authorization

Running hw_server from administrator console returns the same output, and still no boards can be seen.

 

Could it be a hardware fault of my board? 

Thanks

 

 

0 Kudos
1 Solution

Accepted Solutions
Visitor gpguizzo
Visitor
84 Views
Registered: ‎12-24-2018

Re: hw_server Warning: Cannot create '3000:arm' GDB server

Jump to solution

Replying to my own question.

It wasn't a hardware fault, trying the board with another pc showed it was ok. Connecting a platform cable to the main machine though would give the same result as before.

Completely removing Vivado and reinstalling it did the job and now I can program/debug again. I can still see the warning aforementioned anyway.

 

 

0 Kudos
1 Reply
Visitor gpguizzo
Visitor
85 Views
Registered: ‎12-24-2018

Re: hw_server Warning: Cannot create '3000:arm' GDB server

Jump to solution

Replying to my own question.

It wasn't a hardware fault, trying the board with another pc showed it was ok. Connecting a platform cable to the main machine though would give the same result as before.

Completely removing Vivado and reinstalling it did the job and now I can program/debug again. I can still see the warning aforementioned anyway.

 

 

0 Kudos