cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
nwp-100
Visitor
Visitor
619 Views
Registered: ‎09-16-2019

issue after porting project from SDK2016.2 to SDK 2019.1

Jump to solution

I have project which is model in 2016.2 in xilinx version. I install 2019.1 and run that project. In ISE or Vivado all thing going well but when i launch it in SDK, it is not working and in project manger only i see hdf file folder, it nver show me stanalone_bsp_0 folder. 

Can you guide me how to do it in SDK.

0 Kudos
Reply
1 Solution

Accepted Solutions
celliott
Xilinx Employee
Xilinx Employee
499 Views
Registered: ‎08-01-2019

Were you able to try the steps mentioned except update to 2019.1?

I imagine the steps would be similar except use the versions you are asking about.

  1. Update the hardware to 2019.1
  2. Re-create the BSP project based on the new hardware definition
  3. Create empty application projects for your previous 2016.2 projects
  4. Import the source code into the empty application projects

View solution in original post

3 Replies
celliott
Xilinx Employee
Xilinx Employee
558 Views
Registered: ‎08-01-2019

Hi @nwp-100,

This forum discusses how to migrate from SDK2016.4 to SDK2018.3 and the steps are italicized below.

https://forums.xilinx.com/t5/Embedded-Development-Tools/Migrate-SDK-project-from-2016-4-to-2018-3/td-p/933591

I would recommend these steps:

  1. Update the hardware to 2018.3
  2. Re-create the BSP project based on the new hardware definition
  3. Create empty application projects for your previous 2016.4 projects
  4. Import the source code into the empty application projects

This will make sure that all the dependencies are accounted for.

Hope this helps!

Sincerely,

Courtney

----------------------------------------------------------------------------------------------------------------------
Please don’t forget to reply, give kudos, and accept as a solution if you found this helpful!
----------------------------------------------------------------------------------------------------------------------

0 Kudos
Reply
nwp-100
Visitor
Visitor
521 Views
Registered: ‎09-16-2019

I need for 2019.1 version, i working on that and install only 2019.1 xilinx version.

0 Kudos
Reply
celliott
Xilinx Employee
Xilinx Employee
500 Views
Registered: ‎08-01-2019

Were you able to try the steps mentioned except update to 2019.1?

I imagine the steps would be similar except use the versions you are asking about.

  1. Update the hardware to 2019.1
  2. Re-create the BSP project based on the new hardware definition
  3. Create empty application projects for your previous 2016.2 projects
  4. Import the source code into the empty application projects

View solution in original post