UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor mithunsaha
Visitor
494 Views
Registered: ‎10-12-2017

optional HW & SDSoC license for ZCU102 Evaluation kit

Hello,

 

I have got ZCU102 evaluation board and I am trying to run provided example design modules.

On this link: http://www.wiki.xilinx.com/Zynq%20UltraScale%20MPSoC%20Base%20TRD%202017.4

It described, there are some optional hardware required as follows:

  • HDMI video source with output supporting one of the following resolutions:
    • 3840x2160 or
    • 1920x1080 or
    • 1280x720
  • USB webcam
  • Leopard LI-IMX274MIPI-FMC (only supported on rev 1.0 boards)

My question is, do I really need to buy 2 of these above hardware? If I buy 2 USB webcam, then can I run example design modules? Please suggest me.

 

Also I have got 1 year worth of Vivado node-locked license and 60 days of SDSoC license. I thought I’ll get 1 year of SDSoC license as well. Am I missing something here? Please let me know.

 

Thanks in advance.

0 Kudos
3 Replies
Scholar dpaul24
Scholar
468 Views
Registered: ‎08-07-2014

Re: optional HW & SDSoC license for ZCU102 Evaluation kit

@mithunsaha,

 

My question is, do I really need to buy 2 of these above hardware?

 

No you don't! Your problem is I guess, is to get an HDMI source, as cheaply as possible.

 

If you have a PC/laptop with HDMI o/p, then just use that as a source.

 

 

 

--------------------------------------------------------------------------------------------------------
FPGA enthusiast!
All PMs will be ignored
--------------------------------------------------------------------------------------------------------
0 Kudos
Visitor mithunsaha
Visitor
465 Views
Registered: ‎10-12-2017

Re: optional HW & SDSoC license for ZCU102 Evaluation kit

@dpaul24

 

Thanks for your reply.

So, to run example TRD it requires only 1 video source rather than 2 and this source could be HDMI or USB webcam or FMC cam. If I misunderstood please correct me.

0 Kudos
Scholar dpaul24
Scholar
458 Views
Registered: ‎08-07-2014

Re: optional HW & SDSoC license for ZCU102 Evaluation kit

@mithunsaha,

 

You need only 1 source.

 

So, to run example TRD it requires only 1 video source rather than 2 and this source could be HDMI or USB webcam or FMC cam.

Yes.

 

--------------------------------------------------------------------------------------------------------
FPGA enthusiast!
All PMs will be ignored
--------------------------------------------------------------------------------------------------------
0 Kudos