cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
rover3344
Participant
Participant
971 Views
Registered: ‎03-26-2019

zcu102 user_si570

Jump to solution

The signal from the user_si570 clock of my zcu102 evaluation board is a sinusoidal waveform. I don't know if I check the error or if it is sinusoidal.

Thank you for your help.

0 Kudos
1 Solution

Accepted Solutions
ghasemi_r
Explorer
Explorer
868 Views
Registered: ‎05-07-2018

Hi

This waveform is a normal clock.

The clock is not square in real

 

View solution in original post

0 Kudos
4 Replies
travisc
Moderator
Moderator
916 Views
Registered: ‎10-19-2011

Do you have a waveform? What configuration do you have it set for?

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
rover3344
Participant
Participant
896 Views
Registered: ‎03-26-2019

I did not make any settings, but kept the default settings. I measured it directly after power-on, the frequency is 300MHZ.

Thank you for your help, don't forget to reply

微信图片_201911020949400.jpg
0 Kudos
ghasemi_r
Explorer
Explorer
869 Views
Registered: ‎05-07-2018

Hi

This waveform is a normal clock.

The clock is not square in real

 

View solution in original post

0 Kudos
rover3344
Participant
Participant
784 Views
Registered: ‎03-26-2019

Thanks

0 Kudos