cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
1,319 Views
Registered: ‎11-13-2017

In JESD204 Hardware Demonstration User Guide

In JESD204 Hardware Demonstration User Guide,written follow(5 page)

 

To Perform a Register Write Access
   1. Using the axi_ctrl toggle button select
       a. ‘0’ to write to the receive JESD204 core
       b. ‘1’ to write to the transmit JESD204 core

 

But axi_ctrl is not exist in vio screen.

How to wrte?

 

0 Kudos
6 Replies
Highlighted
Moderator
Moderator
1,279 Views
Registered: ‎02-16-2010

Can you see if all the signals are added to vio GUI? There will be a "+" sign to the left of the VIO GUI. Click this and check if axi_ctrl needs to be added.
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
0 Kudos
Highlighted
Observer
Observer
1,244 Views
Registered: ‎11-13-2017

Yes of cause

0 Kudos
Highlighted
Observer
Observer
631 Views
Registered: ‎05-28-2019

Could you please let me know where I can find the JESD204 Hardware Demo? I've been stuck with JESD for a long time since could not find any available examples. Thanks in advance!

0 Kudos
Highlighted
527 Views
Registered: ‎07-08-2019

Hello, have you found this demo? I can't find it either。
0 Kudos
Highlighted
Observer
Observer
515 Views
Registered: ‎05-28-2019

@220180830@seu.edu.cn,

I've confirmed that Xilinx no longer provides any JESD204 Demo. There used to be some earlier in the JESD Lounge, but for some reason(maybe tired of updating the demo with newer design suits and latest board kit), instead, you can right-click the JESD204 IP, and open then "Example Design" in the Vivado. By studying their test modules and the simulation waves, you can have a good understanding of the IP, which will be enough to make your own design. Also, the JESD204 Product Guide v7.2 really helps a lot. 

Highlighted
497 Views
Registered: ‎07-08-2019

@yawenluo16,
Thank you. It's very kind of you
0 Kudos