cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mycstudy
Visitor
Visitor
236 Views
Registered: ‎03-09-2021

ila trigger condition setting

I am using the zynq development board, read the output data of xadc with ila (as shown in Figure 1), and set the trigger condition to be RREADY==1, so that a jump of the RDATA signal will be successfully displayed after the trigger (as shown in Figure 2). I now hope that ila can display the effect like Figure 3, which is to display multiple transitions of the DATA signal. I don’t know how to set the trigger condition?

mycstudy_0-1618643455005.png

 

mycstudy_1-1618643465296.png

 

mycstudy_0-1618643531269.png

 

 

0 Kudos
1 Reply
mnagpal
Xilinx Employee
Xilinx Employee
171 Views
Registered: ‎12-03-2019

Hi @mycstudy ,

Please check the Chapter 10,11 from the UG908. I think it will help you.

Regards,
Manish