166823996 bytes read in 10987 ms (14.5 MiB/s) ## Loading kernel from FIT Image at 10000000 ... Using 'conf@system-top.dtb' configuration Trying 'kernel@1' kernel subimage Description: Linux kernel Type: Kernel Image Compression: uncompressed Data Start: 0x10000104 Data Size: 18217472 Bytes = 17.4 MiB Architecture: AArch64 OS: Linux Load Address: 0x00080000 Entry Point: 0x00080000 Hash algo: sha1 Hash value: 3eba8f5a1b9e891cd37dbd0a06307cef571c8279 Verifying Hash Integrity ... sha1+ OK ## Loading ramdisk from FIT Image at 10000000 ... Using 'conf@system-top.dtb' configuration Trying 'ramdisk@1' ramdisk subimage Description: petalinux-user-image Type: RAMDisk Image Compression: gzip compressed Data Start: 0x1116b080 Data Size: 148558379 Bytes = 141.7 MiB Architecture: AArch64 OS: Linux Load Address: unavailable Entry Point: unavailable Hash algo: sha1 Hash value: abb1efcfa8ccb143d1c4d37392f5ee9059cdf2ab Verifying Hash Integrity ... sha1+ OK ## Loading fdt from FIT Image at 10000000 ... Using 'conf@system-top.dtb' configuration Trying 'fdt@system-top.dtb' fdt subimage Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x1115fc08 Data Size: 46002 Bytes = 44.9 KiB Architecture: AArch64 Hash algo: sha1 Hash value: 37916068848b83092a2cc3ff717ee252a443392b Verifying Hash Integrity ... sha1+ OK Booting using the fdt blob at 0x1115fc08 Loading Kernel Image ... OK Loading Ramdisk to 74ff2000, end 7dd9f22b ... OK Loading Device Tree to 0000000074fe3000, end 0000000074ff13b1 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 4.19.0-xilinx-v2019.1 (oe-user@oe-host) (gcc versio n 8.2.0 (GCC)) #1 SMP Wed Jul 10 17:30:36 UTC 2019 [ 0.000000] Machine model: ZynqMP ZCU106 RevA [ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8') [ 0.000000] bootconsole [cdns0] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 1700 MiB at 0x000000000a800000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x3f8 with crng_init=0 [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s53656 r8192 d323 60 u94208 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1033987 [ 0.000000] Kernel command line: earlycon clk_ignore_unused consoleblank=0 cm a=1700M uio_pdrv_genirq.of_id=generic-uio [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes ) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB: mapped [mem 0x06800000-0x0a800000] (64MB) [ 0.000000] Memory: 2158652K/4193280K available (10812K kernel code, 638K rwd ata, 5444K rodata, 832K init, 509K bss, 293828K reserved, 1740800K cma-reserved) [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 99.99MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x170f8de2d3, max_idle_ns: 440795206112 ns [ 0.000003] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 43980 46511101ns [ 0.008257] Console: colour dummy device 80x25 [ 0.012377] console [tty0] enabled [ 0.015744] bootconsole [cdns0] disabled [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 4.19.0-xilinx-v2019.1 (oe-user@oe-host) (gcc versio n 8.2.0 (GCC)) #1 SMP Wed Jul 10 17:30:36 UTC 2019 [ 0.000000] Machine model: ZynqMP ZCU106 RevA [ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8') [ 0.000000] bootconsole [cdns0] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 1700 MiB at 0x000000000a800000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x3f8 with crng_init=0 [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s53656 r8192 d323 60 u94208 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1033987 [ 0.000000] Kernel command line: earlycon clk_ignore_unused consoleblank=0 cm a=1700M uio_pdrv_genirq.of_id=generic-uio [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes ) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB: mapped [mem 0x06800000-0x0a800000] (64MB) [ 0.000000] Memory: 2158652K/4193280K available (10812K kernel code, 638K rwd ata, 5444K rodata, 832K init, 509K bss, 293828K reserved, 1740800K cma-reserved) [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 99.99MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x170f8de2d3, max_idle_ns: 440795206112 ns [ 0.000003] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 43980 46511101ns [ 0.008257] Console: colour dummy device 80x25 [ 0.012377] console [tty0] enabled [ 0.015744] bootconsole [cdns0] disabled [ 0.019656] Calibrating delay loop (skipped), value calculated using timer fr equency.. 199.98 BogoMIPS (lpj=399960) [ 0.019669] pid_max: default: 32768 minimum: 301 [ 0.019781] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.019800] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.020498] ASID allocator initialised with 32768 entries [ 0.020550] rcu: Hierarchical SRCU implementation. [ 0.020887] EFI services will not be available. [ 0.021006] smp: Bringing up secondary CPUs ... [ 0.021284] Detected VIPT I-cache on CPU1 [ 0.021313] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.021616] Detected VIPT I-cache on CPU2 [ 0.021635] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.021924] Detected VIPT I-cache on CPU3 [ 0.021942] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.021986] smp: Brought up 1 node, 4 CPUs [ 0.022020] SMP: Total of 4 processors activated. [ 0.022028] CPU features: detected: 32-bit EL0 Support [ 0.023558] CPU: All CPU(s) started at EL2 [ 0.023573] alternatives: patching kernel code [ 0.024446] devtmpfs: initialized [ 0.029429] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 7645041785100000 ns [ 0.029451] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.064884] xor: measuring software checksum speed [ 0.103978] 8regs : 2375.000 MB/sec [ 0.144004] 8regs_prefetch: 2051.000 MB/sec [ 0.184034] 32regs : 2724.000 MB/sec [ 0.224062] 32regs_prefetch: 2308.000 MB/sec [ 0.224071] xor: using function: 32regs (2724.000 MB/sec) [ 0.224085] pinctrl core: initialized pinctrl subsystem [ 0.224692] NET: Registered protocol family 16 [ 0.224967] audit: initializing netlink subsys (disabled) [ 0.225035] audit: type=2000 audit(0.216:1): state=initialized audit_enabled= 0 res=1 [ 0.225498] cpuidle: using governor menu [ 0.225625] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval___ _)) [ 0.225638] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.226325] DMA: preallocated 256 KiB pool for atomic allocations [ 0.240491] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.308253] raid6: int64x1 gen() 446 MB/s [ 0.376208] raid6: int64x1 xor() 453 MB/s [ 0.444314] raid6: int64x2 gen() 681 MB/s [ 0.512349] raid6: int64x2 xor() 599 MB/s [ 0.580374] raid6: int64x4 gen() 981 MB/s [ 0.648400] raid6: int64x4 xor() 736 MB/s [ 0.716483] raid6: int64x8 gen() 1162 MB/s [ 0.784491] raid6: int64x8 xor() 759 MB/s [ 0.852567] raid6: neonx1 gen() 735 MB/s [ 0.920597] raid6: neonx1 xor() 880 MB/s [ 0.988623] raid6: neonx2 gen() 1127 MB/s [ 1.056679] raid6: neonx2 xor() 1172 MB/s [ 1.124747] raid6: neonx4 gen() 1477 MB/s [ 1.192771] raid6: neonx4 xor() 1417 MB/s [ 1.260813] raid6: neonx8 gen() 1530 MB/s [ 1.328866] raid6: neonx8 xor() 1459 MB/s [ 1.328874] raid6: using algorithm neonx8 gen() 1530 MB/s [ 1.328882] raid6: .... xor() 1459 MB/s, rmw enabled [ 1.328890] raid6: using neon recovery algorithm [ 1.329104] xilinx-gpio a0060000.gpio: Input clock not found [ 1.329149] xilinx-gpio a0061000.gpio: Input clock not found [ 1.329187] xilinx-gpio a0062000.gpio: Input clock not found [ 1.329226] xilinx-gpio a0063000.gpio: Input clock not found [ 1.329797] SCSI subsystem initialized [ 1.329955] usbcore: registered new interface driver usbfs [ 1.329992] usbcore: registered new interface driver hub [ 1.330029] usbcore: registered new device driver usb [ 1.330098] media: Linux media interface: v0.10 [ 1.330128] videodev: Linux video capture interface: v2.00 [ 1.330161] pps_core: LinuxPPS API ver. 1 registered [ 1.330170] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti [ 1.330193] PTP clock support registered [ 1.330223] EDAC MC: Ver: 3.0.0 [ 1.330901] zynqmp-ipi-mbox mailbox@ff990400: Probed ZynqMP IPI Mailbox drive r. [ 1.331154] FPGA manager framework [ 1.331326] Advanced Linux Sound Architecture Driver Initialized. [ 1.331596] Bluetooth: Core ver 2.22 [ 1.331623] NET: Registered protocol family 31 [ 1.331631] Bluetooth: HCI device and connection manager initialized [ 1.331643] Bluetooth: HCI socket layer initialized [ 1.331652] Bluetooth: L2CAP socket layer initialized [ 1.331676] Bluetooth: SCO socket layer initialized [ 1.331987] clocksource: Switched to clocksource arch_sys_counter [ 1.332064] VFS: Disk quotas dquot_6.6.0 [ 1.332108] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.336471] NET: Registered protocol family 2 [ 1.336825] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 3276 8 bytes) [ 1.336877] TCP established hash table entries: 32768 (order: 6, 262144 bytes ) [ 1.337085] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.337469] TCP: Hash tables configured (established 32768 bind 32768) [ 1.337536] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.337613] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.337766] NET: Registered protocol family 1 [ 1.337975] RPC: Registered named UNIX socket transport module. [ 1.337985] RPC: Registered udp transport module. [ 1.337992] RPC: Registered tcp transport module. [ 1.337999] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.338337] Trying to unpack rootfs image as initramfs... [ 7.628892] Freeing initrd memory: 145076K [ 7.629326] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 7.629495] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters av ailable [ 7.630446] Initialise system trusted keyrings [ 7.630536] workingset: timestamp_bits=62 max_order=20 bucket_order=0 [ 7.631233] NFS: Registering the id_resolver key type [ 7.631250] Key type id_resolver registered [ 7.631258] Key type id_legacy registered [ 7.631271] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 7.631290] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 8.719087] NET: Registered protocol family 38 [ 8.777197] Key type asymmetric registered [ 8.777207] Asymmetric key parser 'x509' registered [ 8.777253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 47) [ 8.777266] io scheduler noop registered [ 8.777273] io scheduler deadline registered [ 8.777318] io scheduler cfq registered (default) [ 8.777326] io scheduler mq-deadline registered [ 8.777334] io scheduler kyber registered [ 8.779016] xilinx-frmbuf b0010000.v_frmbuf_rd: failed to get ap_clk (-517) [ 8.805243] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 8.808961] xlnx-sdi-tx a0040000.v_smpte_uhdsdi_tx_ss: failed to get s_axi_ac lk -517 [ 8.809182] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 8.813625] brd: module loaded [ 8.817411] loop: module loaded [ 8.818374] mtdoops: mtd device (mtddev=name/number) must be supplied [ 8.819738] libphy: Fixed MDIO Bus: probed [ 8.820960] tun: Universal TUN/TAP device driver, 1.6 [ 8.821292] CAN device driver interface [ 8.822381] usbcore: registered new interface driver asix [ 8.822419] usbcore: registered new interface driver ax88179_178a [ 8.822452] usbcore: registered new interface driver cdc_ether [ 8.822483] usbcore: registered new interface driver net1080 [ 8.822514] usbcore: registered new interface driver cdc_subset [ 8.822545] usbcore: registered new interface driver zaurus [ 8.822588] usbcore: registered new interface driver cdc_ncm [ 8.823139] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.823149] ehci-pci: EHCI PCI platform driver [ 8.823476] usbcore: registered new interface driver uas [ 8.823517] usbcore: registered new interface driver usb-storage [ 8.824076] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc 0 [ 8.824147] i2c /dev entries driver [ 8.826031] usbcore: registered new interface driver uvcvideo [ 8.826043] USB Video Class driver (1.1.1) [ 8.826641] Bluetooth: HCI UART driver ver 2.3 [ 8.826654] Bluetooth: HCI UART protocol H4 registered [ 8.826662] Bluetooth: HCI UART protocol BCSP registered [ 8.826690] Bluetooth: HCI UART protocol LL registered [ 8.826698] Bluetooth: HCI UART protocol ATH3K registered [ 8.826723] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 8.826771] Bluetooth: HCI UART protocol Intel registered [ 8.826798] Bluetooth: HCI UART protocol QCA registered [ 8.826835] usbcore: registered new interface driver bcm203x [ 8.826870] usbcore: registered new interface driver bpa10x [ 8.826905] usbcore: registered new interface driver bfusb [ 8.826942] usbcore: registered new interface driver btusb [ 8.826951] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 8.827003] usbcore: registered new interface driver ath3k [ 8.827133] EDAC MC: ECC not enabled [ 8.827349] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac control ler zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT) [ 8.828093] sdhci: Secure Digital Host Controller Interface driver [ 8.828103] sdhci: Copyright(c) Pierre Ossman [ 8.828111] sdhci-pltfm: SDHCI platform and OF driver helper [ 8.828482] ledtrig-cpu: registered to indicate activity on CPUs [ 8.828532] zynqmp_firmware_probe Platform Management API v1.1 [ 8.828542] zynqmp_firmware_probe Trustzone version v1.0 [ 8.831332] zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: zynqmp pinctrl i nitialized [ 8.853237] zynqmp_clk_mux_get_parent() getparent failed for clock: lpd_wdt, ret = -22 [ 8.853777] alg: No test for xilinx-zynqmp-aes (zynqmp-aes) [ 8.853800] zynqmp_aes zynqmp_aes: AES Successfully Registered [ 8.853800] [ 8.853984] alg: No test for xilinx-keccak-384 (zynqmp-keccak-384) [ 8.854157] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa) [ 8.854378] usbcore: registered new interface driver usbhid [ 8.854388] usbhid: USB HID core driver [ 8.856871] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered [ 8.857284] usbcore: registered new interface driver snd-usb-audio [ 8.858228] pktgen: Packet Generator for packet performance testing. Version: 2.75 [ 8.858618] Initializing XFRM netlink socket [ 8.858696] NET: Registered protocol family 10 [ 8.859065] Segment Routing with IPv6 [ 8.859157] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 8.859485] NET: Registered protocol family 17 [ 8.859501] NET: Registered protocol family 15 [ 8.859519] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 8.859570] can: controller area network core (rev 20170425 abi 9) [ 8.859602] NET: Registered protocol family 29 [ 8.859611] can: raw protocol (rev 20170425) [ 8.859619] can: broadcast manager protocol (rev 20170425 t) [ 8.859629] can: netlink gateway (rev 20170425) max_hops=1 [ 8.859863] Bluetooth: RFCOMM TTY layer initialized [ 8.859875] Bluetooth: RFCOMM socket layer initialized [ 8.859892] Bluetooth: RFCOMM ver 1.11 [ 8.859903] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.859911] Bluetooth: BNEP filters: protocol multicast [ 8.859920] Bluetooth: BNEP socket layer initialized [ 8.859928] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 8.859940] Bluetooth: HIDP socket layer initialized [ 8.860082] 9pnet: Installing 9P2000 support [ 8.860105] Key type dns_resolver registered [ 8.860521] registered taskstats version 1 [ 8.860530] Loading compiled-in X.509 certificates [ 8.860872] Btrfs loaded, crc32c=crc32c-generic [ 8.867234] ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 42, base_baud = 6249375) is a xuartps [ 10.166613] console [ttyPS0] enabled [ 10.170655] GPIO IRQ not connected [ 10.174058] XGpio: gpio@a0060000: registered, base is 510 [ 10.179632] GPIO IRQ not connected [ 10.183034] XGpio: gpio@a0061000: registered, base is 509 [ 10.188610] GPIO IRQ not connected [ 10.192010] XGpio: gpio@a0062000: registered, base is 508 [ 10.197581] GPIO IRQ not connected [ 10.200984] XGpio: gpio@a0063000: registered, base is 504 [ 10.207290] of-fpga-region fpga-full: FPGA Region probed [ 10.213428] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed [ 10.220032] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success [ 10.227139] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success [ 10.234255] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success [ 10.241358] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success [ 10.248473] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success [ 10.255581] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success [ 10.262690] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success [ 10.269800] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success [ 10.276982] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success [ 10.284100] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success [ 10.291206] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success [ 10.298317] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success [ 10.305425] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success [ 10.312540] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success [ 10.319655] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success [ 10.326766] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success [ 10.333866] xilinx-frmbuf b0010000.v_frmbuf_rd: Xilinx AXI frmbuf DMA_MEM_TO_ DEV [ 10.341327] xilinx-frmbuf b0010000.v_frmbuf_rd: Xilinx AXI FrameBuffer Engine Driver Probed!! [ 10.350041] xlnx-mixer a0070000.v_mix: vtc bridge property not present [ 10.356695] xlnx-mixer a0070000.v_mix: Xilinx Mixer driver probed success [ 10.363919] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.370536] [drm] No driver support for vblank timestamp query. [ 10.376548] xlnx-drm xlnx-drm.0: bound a0070000.v_mix (ops 0xffffff8008bcbae8 ) [ 10.383799] xlnx-drm xlnx-drm.0: bound a0040000.v_smpte_uhdsdi_tx_ss (ops 0xf fffff8008bcc0f0) [ 10.392331] xlnx-mixer a0070000.v_mix: fbdev is not initialized [ 10.398457] [drm] Initialized xlnx 1.0.0 20130509 for a0070000.v_mix on minor 0 [ 10.406109] xilinx-psgtr fd400000.zynqmp_phy: Lane:1 type:8 protocol:4 pll_lo cked:yes [ 10.416698] xilinx-dp-snd-codec fd4a0000.zynqmp-display:zynqmp_dp_snd_codec0: Xilinx DisplayPort Sound Codec probed [ 10.427407] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0: Xilinx DisplayPort Sound PC M probed [ 10.435463] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1: Xilinx DisplayPort Sound PC M probed [ 10.444013] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xi linx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok [ 10.456463] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xi linx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok [ 10.469140] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: Xi linx DisplayPort Sound Card probed [ 10.479326] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000 [ 10.486315] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.492930] [drm] No driver support for vblank timestamp query. [ 10.498912] xlnx-drm xlnx-drm.1: bound fd4a0000.zynqmp-display (ops 0xffffff8 008bcf900) [ 11.584000] [drm] Cannot find any crtc or sizes [ 11.588747] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.zynqmp-display on minor 1 [ 11.596854] zynqmp-display fd4a0000.zynqmp-display: ZynqMP DisplayPort Subsys tem driver probed [ 11.605825] xilinx-psgtr fd400000.zynqmp_phy: Lane:3 type:3 protocol:2 pll_lo cked:yes [ 11.623776] ahci-ceva fd0c0000.ahci: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0 x3 impl platform mode [ 11.632736] ahci-ceva fd0c0000.ahci: flags: 64bit ncq sntf pm clo only pmp fb s pio slum part ccc sds apst [ 11.643148] scsi host0: ahci-ceva [ 11.646728] scsi host1: ahci-ceva [ 11.650182] ata1: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x1 00 irq 40 [ 11.658096] ata2: SATA max UDMA/133 mmio [mem 0xfd0c0000-0xfd0c1fff] port 0x1 80 irq 40 [ 11.666684] m25p80 spi0.0: found n25q512a, expected m25p80 [ 11.672542] m25p80 spi0.0: n25q512a (131072 Kbytes) [ 11.677437] 4 fixed-partitions partitions found on MTD device spi0.0 [ 11.683787] Creating 4 MTD partitions on "spi0.0": [ 11.688573] 0x000000000000-0x000000100000 : "qspi-fsbl-uboot" [ 11.694781] 0x000000100000-0x000000600000 : "qspi-linux" [ 11.700489] 0x000000600000-0x000000620000 : "qspi-device-tree" [ 11.706722] 0x000000620000-0x000000c00000 : "qspi-rootfs" [ 11.714557] macb ff0e0000.ethernet: Not enabling partial store and forward [ 11.721935] libphy: MACB_mii_bus: probed [ 11.730931] TI DP83867 ff0e0000.ethernet-ffffffff:0c: attached PHY driver [TI DP83867] (mii_bus:phy_addr=ff0e0000.ethernet-ffffffff:0c, irq=POLL) [ 11.743996] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e 0000 irq 30 (00:0a:35:00:22:01) [ 11.754192] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM [ 11.760754] xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM [ 11.767252] xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM [ 11.773750] xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM [ 11.781579] dwc3 fe200000.dwc3: Failed to get clk 'ref': -2 [ 11.787430] xilinx-psgtr fd400000.zynqmp_phy: Lane:2 type:0 protocol:3 pll_lo cked:yes [ 11.795493] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 11.800992] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu mber 1 [ 11.808976] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x0000000202010810 [ 11.818395] xhci-hcd xhci-hcd.0.auto: irq 52, io mem 0xfe200000 [ 11.824526] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 4.19 [ 11.832803] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 11.840022] usb usb1: Product: xHCI Host Controller [ 11.844896] usb usb1: Manufacturer: Linux 4.19.0-xilinx-v2019.1 xhci-hcd [ 11.851589] usb usb1: SerialNumber: xhci-hcd.0.auto [ 11.856762] hub 1-0:1.0: USB hub found [ 11.860535] hub 1-0:1.0: 1 port detected [ 11.864639] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 11.870132] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus nu mber 2 [ 11.877798] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 11.884536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 4.19 [ 11.892804] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 11.900022] usb usb2: Product: xHCI Host Controller [ 11.904897] usb usb2: Manufacturer: Linux 4.19.0-xilinx-v2019.1 xhci-hcd [ 11.911591] usb usb2: SerialNumber: xhci-hcd.0.auto [ 11.916710] hub 2-0:1.0: USB hub found [ 11.920475] hub 2-0:1.0: 1 port detected [ 11.925553] pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulato r [ 11.932812] pca953x 0-0020: Linked as a consumer to regulator.0 [ 11.939464] pca953x 0-0021: 0-0021 supply vcc not found, using dummy regulato r [ 11.946711] pca953x 0-0021: Linked as a consumer to regulator.0 [ 11.954014] ina2xx 3-0040: power monitor ina226 (Rshunt = 5000 uOhm) [ 11.960812] ina2xx 3-0041: power monitor ina226 (Rshunt = 5000 uOhm) [ 11.967607] ina2xx 3-0042: power monitor ina226 (Rshunt = 5000 uOhm) [ 11.974398] ina2xx 3-0043: power monitor ina226 (Rshunt = 5000 uOhm) [ 11.981189] ina2xx 3-0044: power monitor ina226 (Rshunt = 5000 uOhm) [ 11.982192] ata2: SATA link down (SStatus 0 SControl 330) [ 11.987992] ina2xx 3-0045: power monitor ina226 (Rshunt = 5000 uOhm) [ 11.992974] ata1: SATA link down (SStatus 0 SControl 330) [ 11.999736] ina2xx 3-0046: power monitor ina226 (Rshunt = 5000 uOhm) [ 12.011489] ina2xx 3-0047: power monitor ina226 (Rshunt = 5000 uOhm) [ 12.018276] ina2xx 3-004a: power monitor ina226 (Rshunt = 5000 uOhm) [ 12.025066] ina2xx 3-004b: power monitor ina226 (Rshunt = 5000 uOhm) [ 12.031449] i2c i2c-0: Added multiplexed i2c bus 3 [ 12.036871] ina2xx 4-0040: power monitor ina226 (Rshunt = 2000 uOhm) [ 12.043654] ina2xx 4-0041: power monitor ina226 (Rshunt = 5000 uOhm) [ 12.050457] ina2xx 4-0042: power monitor ina226 (Rshunt = 5000 uOhm) [ 12.057244] ina2xx 4-0043: power monitor ina226 (Rshunt = 5000 uOhm) [ 12.064038] ina2xx 4-0044: power monitor ina226 (Rshunt = 5000 uOhm) [ 12.070834] ina2xx 4-0045: power monitor ina226 (Rshunt = 5000 uOhm) [ 12.077633] ina2xx 4-0046: power monitor ina226 (Rshunt = 5000 uOhm) [ 12.084424] ina2xx 4-0047: power monitor ina226 (Rshunt = 5000 uOhm) [ 12.090807] i2c i2c-0: Added multiplexed i2c bus 4 [ 12.113708] random: fast init done [ 12.132603] i2c i2c-0: Added multiplexed i2c bus 5 [ 12.137525] i2c i2c-0: Added multiplexed i2c bus 6 [ 12.142316] pca954x 0-0075: registered 4 multiplexed busses for I2C mux pca95 44 [ 12.149649] cdns-i2c ff020000.i2c: 400 kHz mmio ff020000 irq 32 [ 12.157645] at24 7-0054: 1024 byte 24c08 EEPROM, writable, 1 bytes/write [ 12.164379] i2c i2c-1: Added multiplexed i2c bus 7 [ 12.169383] i2c i2c-1: Added multiplexed i2c bus 8 [ 12.174310] i2c i2c-1: Added multiplexed i2c bus 9 [ 12.191991] si570 10-005d: registered, current frequency 148500000 Hz [ 12.198458] i2c i2c-1: Added multiplexed i2c bus 10 [ 12.203539] si5324 11-0069: si5328 probed [ 12.264121] si5324 11-0069: si5328 probe successful [ 12.269032] i2c i2c-1: Added multiplexed i2c bus 11 [ 12.274118] i2c i2c-1: Added multiplexed i2c bus 12 [ 12.279128] i2c i2c-1: Added multiplexed i2c bus 13 [ 12.284125] i2c i2c-1: Added multiplexed i2c bus 14 [ 12.289009] pca954x 1-0074: registered 8 multiplexed busses for I2C switch pc a9548 [ 12.296769] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 12.303957] i2c i2c-1: Added multiplexed i2c bus 15 [ 12.308965] i2c i2c-1: Added multiplexed i2c bus 16 [ 12.313969] i2c i2c-1: Added multiplexed i2c bus 17 [ 12.319369] i2c i2c-1: Added multiplexed i2c bus 18 [ 12.324398] i2c i2c-1: Added multiplexed i2c bus 19 [ 12.329458] i2c i2c-1: Added multiplexed i2c bus 20 [ 12.334489] i2c i2c-1: Added multiplexed i2c bus 21 [ 12.339526] i2c i2c-1: Added multiplexed i2c bus 22 [ 12.344407] pca954x 1-0075: registered 8 multiplexed busses for I2C switch pc a9548 [ 12.352007] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 33 [ 12.358391] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer at (____ptrval_ ___) with timeout 60s [ 12.367686] cdns-wdt ff150000.watchdog: Xilinx Watchdog Timer at (____ptrval_ ___) with timeout 10s [ 12.376942] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1199880 KHz [ 12.384393] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1199999 KHz [ 12.394674] usb 2-1: New USB device found, idVendor=0951, idProduct=1666, bcd Device= 1.10 [ 12.402863] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 12.410001] usb 2-1: Product: DataTraveler 3.0 [ 12.414440] usb 2-1: Manufacturer: Kingston [ 12.418623] usb 2-1: SerialNumber: FCAA149C5A63E310D92AB3A5 [ 12.426190] usb-storage 2-1:1.0: USB Mass Storage device detected [ 12.432624] scsi host2: usb-storage 2-1:1.0 [ 12.447994] mmc0: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit [ 12.464070] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 12.471104] rtc_zynqmp ffa60000.rtc: setting system clock to 2019-07-12 15:50 :15 UTC (1562946615) [ 12.479997] of_cfs_init [ 12.482451] of_cfs_init: OK [ 12.485435] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase [ 12.527700] mmc0: new high speed SDHC card at address aaaa [ 12.533719] mmcblk0: mmc0:aaaa SB16G 14.8 GiB [ 12.542326] mmcblk0: p1 p2 [ 12.629674] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.636211] clk: Not disabling unused clocks [ 12.640486] ALSA device list: [ 12.643441] #0: DisplayPort monitor [ 12.647364] platform regulatory.0: Direct firmware load for regulatory.db fai led with error -2 [ 12.655985] cfg80211: failed to load regulatory.db [ 12.661055] Freeing unused kernel memory: 832K [ 12.680013] Run /init as init process INIT: version 2.88 booting [ 12.752037] [drm] Cannot find any crtc or sizes [ 12.830889] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Starting udev [ 12.874943] udevd[2011]: starting version 3.2.5 [ 12.879814] random: udevd: uninitialized urandom read (16 bytes read) [ 12.886312] random: udevd: uninitialized urandom read (16 bytes read) [ 12.892809] random: udevd: uninitialized urandom read (16 bytes read) [ 12.904191] udevd[2012]: starting eudev-3.2.5 [ 12.962709] mali: loading out-of-tree module taints kernel. [ 13.293318] xilinx-vcu xilinx-vcu: Could not get core_enc clock [ 13.302891] VCU PLL: enable [ 13.306694] xilinx-vcu xilinx-vcu: xvcu_probe: Probed successfully [ 13.334036] al5e a0100000.al5e: l2 prefetch size:17530880 (bits), l2 color bi tdepth:10 [ 13.335264] al5d a0120000.al5d: l2 prefetch size:17530880 (bits), l2 color bi tdepth:10 [ 13.433107] EXT4-fs (mmcblk0p2): recovery complete [ 13.437916] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O pts: (null) [ 13.453894] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ : 0 ANSI: 6 [ 13.463895] sd 2:0:0:0: [sda] 30277632 512-byte logical blocks: (15.5 GB/14.4 GiB) [ 13.472626] sd 2:0:0:0: [sda] Write Protect is off [ 13.478624] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 13.546197] sda: sda1 [ 13.554214] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 13.671933] FAT-fs (sda1): Volume was not properly unmounted. Some data may b e corrupt. Please run fsck. Configuring packages on first boot.... (This may take several minutes. Please do not power off the machine.) Running postinst /etc/rpm-postinsts/100-libmali-xlnx... /usr/sbin/run-postinsts: line 70: update-alternatives:: command not found Running postinst /etc/rpm-postinsts/101-sysvinit-inittab... update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) INIT: Entering runlevel: 5 Configuring network interfaces... [ 14.014837] pps pps0: new PPS source ptp0 [ 14.018869] macb ff0e0000.ethernet: gem-ptp-timer ptp clock registered. [ 14.025574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc: started, v1.29.2 udhcpc: sending discover [ 15.020388] macb ff0e0000.ethernet eth0: link up (1000/Full) [ 15.026069] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready udhcpc: sending discover udhcpc: sending discover ^[[4~udhcpc: no lease, forking to background done. Starting system message bus: dbus. Starting Xserver Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... X.Org X Server 1.20.1 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.10.0-693.el7.x86_64 x86_64 Current Operating System: Linux zcu106_vcu_trd 4.19.0-xilinx-v2019.1 #1 SMP Wed Jul 10 17:30:36 UTC 2019 aarch64 Kernel command line: earlycon clk_ignore_unused consoleblank=0 cma=1700M uio_pdrv_genirq.of_id=generic-uio Build Date: 10 July 2019 05:37:00PM Current version of pixman: 0.34.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 12 15:50:25 2019 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) Fatal server error: (EE) AddScreen/ScreenInit failed for driver 0 (EE) (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCAFPI791AJxlfjRnmT13ybPOgMu1KE7kkSLKsCRLHHL3JNw0b9XOGgqV+/e2UOp3U2HF3BymTFzBsybpyAaLpIMjX68mAO7UJEEugimk/uTK/fWAP4RSS/Yd/yeoxb4CJkCDYmUWL8tIJl9jjG8HaJcGvany7d8ukNwMQ+GFBOwlUUxXYzyg39zYR3PTq9HkFdAH+yz8hyJxeE1z root@zcu106_vcu_trd Fingerprint: sha1!! be:cf:7f:78:81:10:ce:69:68:d6:7e:11:80:2b:d6:32:12:57:42:f3 dropbear. Starting internet superserver: inetd. Starting syslogd/klogd: done Starting tcf-agent: OK root@zcu106_vcu_trd:~# xinit: giving up xinit: unable to connect to X server: Connection refused xinit: server error net.core.rmem_default = 60000000 net.core.rmem_max = 60000000 net.core.wmem_default = 60000000 net.core.wmem_max = 60000000 setting mode 3840x2160-60Hz@XV20 on connectors 36, crtc 34 [ 40.254757] xlnx-sdi-tx a0040000.v_smpte_uhdsdi_tx_ss: AXI-4 Stream Underflow error root@zcu106_vcu_trd:~# cd /media/card/bin root@zcu106_vcu_trd:/media/card/bin# ls inpdis.cfg inppat1.cfg inppat2.cfg inpsdc.cfg inpstrm.cfg vcu_gst_app xmedia-ctl xmodetest root@zcu106_vcu_trd:/media/card/bin# vcu_gst_app inpsdc.cfg ERROR: vgst_init() failed error code -75 :: "VLIB No media source Available" Get "VLIB No media source Available" error in Tx only design, can be ignored!!! /*************************Pipeline Information Start*************************/ Pipeline Info : On Fps Info : On APM Info : On Output goes on : SDI Frame rate : 50 Number of Source is : 1 Use case is to : Display Device Type : TPG Format : NV12 Width : 1920 Height : 1080 Raw : False Accelerator flag : False Enable_scd flag : False Src Type : File Src URI : file:///media/card/aeroplane.ts /*************************Pipeline Information End*************************/ ERROR: vgst_config_options() failed, error code "VLIB DRM Plane Not Found" root@zcu106_vcu_trd:/media/card/bin#