Xilinx Zynq MP First Stage Boot Loader
Release 2018.3   Nov 17 2020  -  10:55:18
NOTICE:  ATF running on XCZU5EV/silicon v4/RTL5.1 at 0xfffea000
NOTICE:  BL31: Secure code at 0x0
NOTICE:  BL31: Non secure code at 0x8000000
NOTICE:  BL31: v1.5(release):xilinx-v2018.2-919-g08560c36
NOTICE:  BL31: Built : 10:48:44, Nov 17 2020
PMUFW:  v1.1
U-Boot 2018.01 (Nov 17 2020 - 11:18:26 +0000) Xilinx ZynqMP ZCU102 rev1.0
I2C:   ready
DRAM:  2 GiB
usb dr_mode not found
usb dr_mode not found
EL Level:       EL2
Chip ID:        zu5ev
MMC:   mmc@ff170000: 0 (SD)
*** Warning - bad CRC, using default environment
In:    serial@ff000000
Out:   serial@ff000000
Err:   serial@ff000000
Board: Xilinx ZynqMP
Bootmode: SD_MODE1
Net:   ZYNQ GEM: ff0b0000, phyaddr ffffffff, interface rgmii-id
eth0: ethernet@ff0b0000ZYNQ GEM: ff0c0000, phyaddr ffffffff, interface gmii
Could not get PHY for eth1: addr -1
U-BOOT for XU5_5EV_2
ethernet@ff0b0000 Waiting for PHY auto negotiation to complete....... done
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 133.11.25.189 (1263 ms)
Hit any key to stop autoboot:  0
** Bad device mmc 1 **
Device: mmc@ff170000
Manufacturer ID: 3
OEM: 5344
Name: SL16G
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 14.8 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
** Bad device mmc 1 **
ZynqMP>