/include/ "system-conf.dtsi"
/ {


	chosen {
		bootargs = "earlycon console=ttyPS0,115200 clk_ignore_unused earlyprintk uio_pdrv_genirq.of_id=generic-uio";	
	};

};



&gpio {
	compatible = "generic-uio";
};





&usb0 {
	status = "okay";
};



&dwc3_0 {
	status = "okay";
	dr_mode = "host";
};


&si5391_reset_gpio {
	status = "disabled";
};


&MultiProtocol_MP_1 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";
	port-number = <1>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};


&MultiProtocol_MP_2 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <2>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};


&RS422_RS422_1 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <3>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};



&RS422_RS422_10 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <4>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};




&RS422_RS422_2 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <5>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};




&RS422_RS422_3 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";
	port-number = <6>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;	
};



&RS422_RS422_4 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <7>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};



&RS422_RS422_5 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <8>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};



&RS422_RS422_6 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <9>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};



&RS422_RS422_7 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <10>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};



&RS422_RS422_8 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <11>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};



&RS422_RS422_9 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <12>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};



&UART_UART_1 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <13>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};



&UART_UART_2 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <14>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};


&UART_UART_3 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <15>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};



&UART_UART_4 {
	compatible = "xlnx,axi-uartlite-2.0", "xlnx,xps-uartlite-1.00.a";
	device_type = "serial";	
	port-number = <16>;
	xlnx,baudrate = <0x1c200>;
	xlnx,data-bits = <0x8>;
	xlnx,odd-parity = <0x0>;
	xlnx,use-parity = <0x0>;
};