UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

取消
显示结果 
搜索替代 
您的意思是: 
Highlighted

请问一个iMPACT的问题:ERROR:iMPACT -The File select is to large for the PROM/storage device

转到解答

电脑配置cpu:e5 2643 、内存128g、固态硬盘:500g。win7 64位。用ise14.7在iMPACT下向xcf32p烧写mcs文件报错。initialize chain一切正常,能连上烧写器,到了assign new configuration file:向xcf32p载入mcs文件就出错,如下图

同事的电脑没问题,自己的笔记本也没问题。mcs文件8Mb多一点,以前哪个机子都没出过这个问题。请大神们看看问题出在哪里?已经重装系统,重装软件,换软件版本都不行。

360截图17571125407651.jpg

P80929-182844.jpg
0 项奖励
1 个已接受解答

已接受的解答

回复: 请问一个iMPACT的问题:ERROR:iMPACT -The File select is to large for the PROM/storage device

转到解答

已经解决了,感觉是mcs文件坏掉了,我从新拷贝了一遍mcs文件就没问题了。谢谢你耐心的询问!

0 项奖励
7 条回复
Community Manager
Community Manager

回复: 请问一个iMPACT的问题:ERROR:iMPACT -The File select is to large for the PROM/storage device

转到解答

Hi @chenyihao1987

 

从描述来看,也就是说同样的mcs文件和同一块板子,在其他的电脑上操作烧写是没有问题的对么?

 

 

-------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------------------------------
如果提供的信息能解决您的问题,请标记为“接受为解决方案”。
如果您认为帖子有帮助,请点击“奖励”。谢谢!
-------------------------------------------------------------------------------------------------
0 项奖励
Xilinx Employee
Xilinx Employee

回复: 请问一个iMPACT的问题:ERROR:iMPACT -The File select is to large for the PROM/storage device

转到解答

Hi @chenyihao1987

 

这个mcs文件是同一个吗?在有问题的电脑上重新生成一个mcs,能烧写吗?

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
如果回答对您有帮助,请给予奖励;
如果回复解决了您的问题,请打勾标记为解决方案。
-------------------------------------------------------------------------
0 项奖励

回复: 请问一个iMPACT的问题:ERROR:iMPACT -The File select is to large for the PROM/storage device

转到解答

已经解决了,感觉是mcs文件坏掉了,我从新拷贝了一遍mcs文件就没问题了。谢谢你耐心的询问!

0 项奖励

回复: 请问一个iMPACT的问题:ERROR:iMPACT -The File select is to large for the PROM/storage device

转到解答

已经解决了,感觉是mcs文件坏掉了,我从新拷贝了一遍mcs文件就没问题了。谢谢你耐心的询问!

0 项奖励
Visitor gustavehuang
Visitor

回复: 请问一个iMPACT的问题:ERROR:iMPACT -The File select is to large for the PROM/storage device

转到解答

向您请教一个问题,XIlinx Impact 如何用Batch Mode实现mcs的烧写,我现在

用以下命令行 但是Flash的时候就报错。

 

impact -batch
>setMode -bscan
>setCable -p auto
>attachflash -position 1 -spi "M25P80"
>assignfiletoattachedflash -position 1 -file "//10.12.66.132/d/RA/product/H584DAN01.0/Code/H584DAN01_RA_code_20171024/H584DAN01_FPGA_20171024.mcs"
>program -p 1 -dataWidth 1 -spionly -e -v

 

以下是用Impact 烧录时的console 。

Welcome to iMPACT
iMPACT Version: 14.7
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -ss
// *** BATCH CMD : setMode -sm
// *** BATCH CMD : setMode -hw140
// *** BATCH CMD : setMode -spi
// *** BATCH CMD : setMode -acecf
// *** BATCH CMD : setMode -acempm
// *** BATCH CMD : setMode -pff
// *** BATCH CMD : loadProjectFile -file "C:\Xilinx\14.7\LabTools\LabTools\bin\auto_project.ipf"
Enumerating cables. Please wait.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
 Driver file xusbdfwu.sys found.
 Driver version: src=1027, dest=1027.
 Driver windrvr6.sys version = 10.2.1.0. WinDriver v10.21 Jungo (c) 1997 - 2010 Build Date: Aug 31 2010 x86_64 64bit SYS 14:14:44, version = 1021.
=======================================================
Found cable - > ESN not available for this cable.
No ESN.
=======================================================
Connecting to cable (Usb Port - USB22).
Checking cable driver.
 Driver file xusbdfwu.sys found.
 Driver version: src=1027, dest=1027.
 Driver windrvr6.sys version = 10.2.1.0. WinDriver v10.21 Jungo (c) 1997 - 2010 Build Date: Aug 31 2010 x86_64 64bit SYS 14:14:44, version = 1021.
ERROR:iMPACT - Cable not found, ESN: 00000000000000
INFO:iMPACT - Failed to open file: -- File ? --, replace with 'bypass'.
INFO:iMPACT:1777 -
Reading C:/Xilinx/14.7/LabTools/LabTools/spartan6/data/xc6slx25.bsd...
INFO:iMPACT:501 - '1': Added Device xc6slx25 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
Unprotect sectors: FALSE
INFO:iMPACT - A CFI file is not detected. To ensure correct and safe configuration,
 Please make sure a CFI file is present in the same directory as the PROM file,
 or, regenerate the PROM file with the latest software.
Active mode is BS
// *** BATCH CMD : setMode -ss
// *** BATCH CMD : setMode -sm
// *** BATCH CMD : setMode -hw140
// *** BATCH CMD : setMode -spi
// *** BATCH CMD : setMode -acecf
// *** BATCH CMD : setMode -acempm
// *** BATCH CMD : setMode -pff
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : attachflash -position 1 -spi "M25P80"
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
INFO:iMPACT - Digilent Plugin: Plugin Version: 2.4.4
INFO:iMPACT - Digilent Plugin: no JTAG device was found.
AutoDetecting cable. Please wait.
*** WARNING ***: When port is set to auto detect mode, cable speed is set to default 6 MHz regardless of explicit arguments supplied for setting the baud rates
PROGRESS_START - Starting Operation.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
 Driver file xusbdfwu.sys found.
 Driver version: src=1027, dest=1027.
 Driver windrvr6.sys version = 10.2.1.0. WinDriver v10.21 Jungo (c) 1997 - 2010 Build Date: Aug 31 2010 x86_64 64bit SYS 14:14:44, version = 1021.
 Cable PID = 0008.
 Max current requested during enumeration is 280 mA.
Type = 0x0605.
 Cable Type = 3, Revision = 0.
 Setting cable speed to 6 MHz.
Cable connection established.
Firmware version = 1100.
File version of C:/Xilinx/14.7/LabTools/LabTools/data/xusbdfwu.hex = 1100.
Firmware hex file version = 1100.
PLD file version = 0012h.
 PLD version = 0012h.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
Type = 0x0605.
ESN not available for this cable.
INFO:iMPACT - Current time: 2018/9/21 16:24:32
// *** BATCH CMD : Program -p 1 -dataWidth 1 -spionly -e -v
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 25000000.
Validating chain...
Boundary-scan chain validated successfully.
'1': SPI access core not detected. SPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file C:/Xilinx/14.7/LabTools/LabTools/spartan6/data/xc6slx25_spi.cor.
'1': Downloading core...
 LCK_cycle = NoWait.
LCK cycle: NoWait
done.
'1': Reading status register contents...
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1100 1110 1100
INFO:iMPACT:2492 - '1': Completed downloading core to device.
'1': IDCODE is '13' (in hex).
'1': ID Check passed.
 '1': IDCODE is '13' (in hex).
'1': ID Check passed.
 '1': Erasing Device.
'1': Using Sector Erase.
'1': Programming Flash.
'1': Reading device contents...
done.
'1': Verification completed.
INFO:iMPACT - File //10.12.66.132/d/RA/product/H584DAN01.0/Code/H584DAN01_RA_code_20171024/H584DAN01_FPGA_20171024.cfi does not exist.
'1':Programming in x1 mode.
'1': Programming device...
PROGRESS_END - End Operation.
Elapsed time =     55 sec.
INFO:iMPACT - Current time: 2018/9/21 16:25:34
// *** BATCH CMD : Program -p 1 -dataWidth 1 -spionly -e -v
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 25000000.
Validating chain...
Boundary-scan chain validated successfully.
'1': SPI access core not detected. SPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file C:/Xilinx/14.7/LabTools/LabTools/spartan6/data/xc6slx25_spi.cor.
'1': Downloading core...
 LCK_cycle = NoWait.
LCK cycle: NoWait
done.
'1': Reading status register contents...
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1100 1110 1100
INFO:iMPACT:2492 - '1': Completed downloading core to device.
'1': IDCODE is '13' (in hex).
'1': ID Check passed.
 '1': IDCODE is '13' (in hex).
'1': ID Check passed.
 '1': Erasing Device.
'1': Using Sector Erase.
'1': Programming Flash.
'1': Reading device contents...
done.
'1': Verification completed.
INFO:iMPACT - File //10.12.66.132/d/RA/product/H584DAN01.0/Code/H584DAN01_RA_code_20171024/H584DAN01_FPGA_20171024.cfi does not exist.
'1':Programming in x1 mode.
'1': Programming device...
 LCK_cycle = NoWait.
LCK cycle: NoWait
done.
'1': Reading status register contents...
[0] CRC ERROR                                                              :         0
[1] IDCODE ERROR                                                           :         0
[2] DCM LOCK STATUS                                                        :         1
[3] GTS_CFG_B STATUS                                                       :         1
[4] GWE STATUS                                                             :         1
[5] GHIGH STATUS                                                           :         1
[6] DECRYPTION ERROR                                                       :         0
[7] DECRYPTOR ENABLE                                                       :         0
[8] HSWAPEN PIN                                                            :         1
[9] MODE PIN M[0]                                                          :         1
[10] MODE PIN M[1]                                                         :         1
[11] RESERVED                                                              :         0
[12] INIT_B PIN                                                            :         1
[13] DONE PIN                                                              :         1
[14] SUSPEND STATUS                                                        :         0
[15] FALLBACK STATUS                                                       :         0
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1100 1110 1100
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
 LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =     82 sec.

0 项奖励
Xilinx Employee
Xilinx Employee

回复: 请问一个iMPACT的问题:ERROR:iMPACT -The File select is to large for the PROM/storage device

转到解答

Hi @gustavehuang,

 

具体报的什么错?console里的log是不是不完整呢?你可以先用GUI界面去执行一次,然后用console里的command去执行。

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
如果回答对您有帮助,请给予奖励;
如果回复解决了您的问题,请打勾标记为解决方案。
-------------------------------------------------------------------------
0 项奖励
Visitor gustavehuang
Visitor

回复: 请问一个iMPACT的问题:ERROR:iMPACT -The File select is to large for the PROM/storage device

转到解答

console 里面是正常GUI操作记录的log ~想请教您如何用 batch mode来实现

 

--再请教您,console里面 带// *** 后命令都是执行过的么?我感觉是不是console里原本就记录不完整。 

0 项奖励