Hi，
我在使用SD卡启动程序时，未添加bit文件时，裸机程序能正常运行；
但是添加了bit文件会log打印出加载bit有误。以下为打印信息：
================= In Stage Err ============
Fsbl Error Status: 0x0**Xilinx Zynq MP First Stage Boot Loader
Release 2018.2 Feb 24 2019 - 09:22:17
Reset Mode : System Reset
Platform: Silicon (4.0), Cluster ID 0x80000000
Running on A53-0 (64-bit) Processor, Device Name: XCZU3EG
Processor Initialization Done
================= In Stage 2 ============
SD1 Boot Mode
SD: rc= 0
File name is BOOT.BIN
Multiboot Reg : 0x0
Image Header Table Offset 0x8C0
*****Image Header Table Details********
Boot Gen Ver: 0x1020000
No of Partitions: 0x3
Partition Header Address: 0x440
Partition Present Device: 0x0
Initialization Success
======= In Stage 3, Partition No:1 =======
UnEncrypted data Length: 0x153E27
Data word offset: 0x153E27
Total Data word length: 0x153E27
Destination Load Address: 0xFFFFFFFF
Execution Address: 0x0
Data word offset: 0xE970
Partition Attributes: 0x26
Destination Device is PL, changing LoadAddress
Non authenticated Bitstream download to start now
DMA transfer done
XFSBL_ERROR_BITSTREAM_LOAD_FAIL
Partition 1 Load Failed, 0x37
