cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
770 Views
Registered: ‎09-19-2016

SDK 2018.2 - Mini U-Boot not found during QSPI programming

Jump to solution

Hello,

 

I am using latest SDK 2018.2. When I try to program QSPI Flash using Xilinx Program Flash tool I am getting this error:

 

Can't find a source file at "/proj/chipscope/xicom_sys/jenkins_clients/xcordevl108/workspace/mini_uboot/mini_uboot_rel/git_mini_uboot/arch/arm/lib/vectors.S" 

Boot mode is QSPI. When I switch it to the JTAG boot mode, the tool hangs after print: "Initialization done, programming the memory".

I didn't have any problems with this tool in SDK 2017.2.

 

What is the solution of this issue?

Best regards,
Nenad

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Adventurer
Adventurer
749 Views
Registered: ‎09-19-2016

The problem was on my side. I forgot I needed to select System Edition during the SDK installation because I have license only for that Edition. Now the issue is gone. I can successfully program to and boot from QSPI.

View solution in original post

0 Kudos
1 Reply
Highlighted
Adventurer
Adventurer
750 Views
Registered: ‎09-19-2016

The problem was on my side. I forgot I needed to select System Edition during the SDK installation because I have license only for that Edition. Now the issue is gone. I can successfully program to and boot from QSPI.

View solution in original post

0 Kudos