cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
joancab
Advisor
Advisor
427 Views
Registered: ‎05-11-2015

UG for Zynq US configuration?

 

Looking for details about configuration and boot of Zynq ultrascale+, in the 'development hub' page there is a link to UG570 but that is about 'ultrascale configuration' and seems to cover just FPGA devices, not SoCs.

I'm interested in configuration using SD card, eMMC, etc. via the PS MIO pins, not the 'traditional' QSPI in bank 0, etc.

0 Kudos
2 Replies
jbeckwi
Xilinx Employee
Xilinx Employee
398 Views
Registered: ‎08-30-2011

https://www.xilinx.com/support/documentation-navigation/design-hubs/dh0072-zynq-mpsoc-boot-and-config-hub.html

 

This page lists a lot of other resources and is the best place to learn about the boot/config process for MPSoC.

0 Kudos
patmcn
Participant
Participant
386 Views
Registered: ‎06-27-2019

I'm going to piggy back off this comment since I'm looking for the same thing.

I'm trying to debug my PS and wanted to know what things I can look at to diagnose the issue.  What things can I look at between power up and before JTAG responds to see if something is wrong?

0 Kudos