UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor skidaddytn
Visitor
198 Views
Registered: ‎11-17-2017

zynq 7000, efuse from Linux?

We are programming the encryption key efuse w/Jtag interface in manufacturing, and this is ok, but I am wondering,   Is it possible to know that the eFuse encryption key has been burned from Linux?   Again, only looking for a yes, or no, we don't need to readback any other information other than it has been burned.

Reason is, we have boards in development here that can run an unsecured boot.bin.   It would be nice to be able to know without trial and error from our firmware upgrade system whether we have the correct file.  In order to do that, we need to know what the hardware is expecting.

 

 

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
109 Views
Registered: ‎10-11-2011

Re: zynq 7000, efuse from Linux?

We have a mechanism for MPSoC: https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841682/Solution+ZynqMP+SoC+revision+read+mechanism

Not sure on what's available for zynq-7000.

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos