UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor 134403
Visitor
6,842 Views
Registered: ‎02-11-2015

Access the xadc from the PS and PL

Hi,

I'm currently working on a small project where I want to interface with some sensors from the XADC on the Zynq board. I've changed my block design with help from this site. I've also implemented PetaLinux on the processing system side, and can read on-chip temperature sensors. What I want to do is to get the PS and PL to interface with the xadc, so I can interface with different sensors.

 

The question is, how can I read the sensor values from the xadc. What is the recommended way to do so? And do I need to use ARM NEON if I want to read the sensor values?

 

Thanks :)

Tags (6)
0 Kudos