UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor z10n0101
Visitor
4,405 Views
Registered: ‎05-29-2009

Error with hardware in the loop...

 Hi all,

I am pretty new to System generator, but after a successful start,

I wanted to make a hardware co-simulation, the problem was that

my board didn't appear in the options, so I tried to add it

but as soon as I click on "New compilation hardware", I get a Java error.

 

Is there any way to correct this problem or other way to add my board?

 

 The error is:

--------------------------------------------------------------------------------------------------------------------------------------------------------

[Fatal Error] :630:3: The element type "Family" must be terminated by the matching end-tag "</Family>".

org.xml.sax.SAXParseException: The element type "Family" must be terminated by the matching end-tag "</Family>".
    at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
    at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
    at javax.xml.parsers.DocumentBuilder.parse(Unknown Source)
    at com.xilinx.sysgen.sbd.j.a(Unknown Source)
    at com.xilinx.sysgen.sbd.j.<init>(Unknown Source)
    at com.xilinx.sysgen.sbd.SBDBuilder.a(Unknown Source)
    at com.xilinx.sysgen.sbd.SBDBuilder.<init>(Unknown Source)
Java exception occurred:
java.lang.NullPointerException

    at com.xilinx.sysgen.sbd.j.a(Unknown Source)

    at com.xilinx.sysgen.sbd.SBDBuilder.a(Unknown Source)

    at com.xilinx.sysgen.sbd.SBDBuilder.<init>(Unknown Source)

--------------------------------------------------------------------------------------------------------------------------------------------------------

 

PS: I already tried with the command:  "xilinx.environment.getpartinfo('refresh')"

 and did not work.

 

Thanks!

0 Kudos
2 Replies
4,245 Views
Registered: ‎03-03-2010

Re: Error with hardware in the loop...

[Fatal Error] :630:3: The element type "Family" must be terminated by the matching end-tag "</Family>".

org.xml.sax.SAXParseException: The element type "Family" must be terminated by the matching end-tag "</Family>".
    at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
    at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(U

nknown Source)
    at javax.xml.parsers.DocumentBuilder.parse(Unknown Source)
    at com.xilinx.sysgen.sbd.j.a(Unknown Source)
    at com.xilinx.sysgen.sbd.j.<init>(Unknown Source)
    at com.xilinx.sysgen.sbd.SBDBuilder.a(Unknown Source)
    at com.xilinx.sysgen.sbd.SBDBuilder.<init>(Unknown Source)
Java exception occurred:
java.lang.NullPointerException

    at com.xilinx.sysgen.sbd.j.a(Unknown Source)

    at com.xilinx.sysgen.sbd.SBDBuilder.a(Unknown Source)

    at com.xilinx.sysgen.sbd.SBDBuilder.<init>(Unknown Source)

0 Kudos
Xilinx Employee
Xilinx Employee
4,184 Views
Registered: ‎11-28-2007

Re: Error with hardware in the loop...

Have you tried the suggestion in AR34135: http://www.xilinx.com/support/answers/34135.htm ?
Cheers,
Jim
0 Kudos