cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Raghunath
Visitor
Visitor
623 Views
Registered: ‎04-08-2020

FFT IP core hanging after sometime

Hi, we have used fft ip in our design initial for some sample the fft is worki fine.

after some time fft is not giving any output or requesting any data what may be the wrong.

my configurations: 32 point fft.

0 Kudos
5 Replies
joancab
Teacher
Teacher
607 Views
Registered: ‎05-11-2015

 

Is it the FFT itself or the DMA you may use to feed data to it?

0 Kudos
Raghunath
Visitor
Visitor
605 Views
Registered: ‎04-08-2020

RFADC ip core output directly feed the data to FFT ip

0 Kudos
joancab
Teacher
Teacher
590 Views
Registered: ‎05-11-2015

Have you tried with an ILA? Is there a chance of it hanging because of NaN results?

0 Kudos
dgisselq
Scholar
Scholar
519 Views
Registered: ‎05-21-2015

@Raghunath ,

There are a couple of reasons why the FFT IP core might hang: 1) Violating the AXI stream protocol, 2) Holding M_AXIS_TREADY low, and 3) Not setting TLAST at the end of an FFT.  This last might happen if you lose count of values going in and out of the FFT

Dan

0 Kudos
Raghunath
Visitor
Visitor
471 Views
Registered: ‎04-08-2020

thanks its the axi interface problem the issue resolved now

0 Kudos