UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer lakshya_tata
Observer
187 Views
Registered: ‎04-10-2019

Switch between Matlab debug interface(Jtag) and Tera Term(Uart)

When i run debug interface for DPD from Matlab, tera term freezes. Even when i close the interface i am not able to use Tera term. It is blocked. I have to restart the board. How do i stop JTAG connection from Matlab and get the control back to Tera term via UART

0 Kudos
1 Reply
Moderator
Moderator
157 Views
Registered: ‎08-16-2018

Re: Switch between Matlab debug interface(Jtag) and Tera Term(Uart)

HI Lakshya, 

We are working on it through sevice-request. I will update the forum page with final results.

  1. It looks to be failing an initial version check issue. Are you using the same version of Vivado i.e. to generate the image as well as DPD Matlab interface.
  2. Other issue worth checking is that clock/reset is applied correctly to system brought up using SD-Card.
0 Kudos