cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
xld75
Visitor
Visitor
941 Views
Registered: ‎05-22-2018

dSPACE Scalexio with FPGA Implement issue

Hey everyone,

 

I am currently using dSPACE scalexio with ds2655 FPGA board (Xilinx® Kintex®-7 160T). 

 

When I built the project, SysGen failed to build the project in the implement step. A runme.log file was shown in matlab message. Can any one help me with this.

 

I also search the forum and found some similar posts: 

https://forums.xilinx.com/t5/DSP-IP-and-Tools/Error-Common-17-206-with-Simulink-and-dSPACE-FPGA-blockset-what/m-p/647733#M3412;

https://forums.xilinx.com/t5/Installation-and-Licensing/Licensing-Issue-with-Vivado-2016-2-Vivado-System-Generation/m-p/809131/highlight/true#M19830.

 

Thanks,

Andy

 

0 Kudos
1 Reply
xld75
Visitor
Visitor
881 Views
Registered: ‎05-22-2018

Problem is partially solved (Only for one thread. Not running for multiple threads.). This issue is due to the a windows 10 update, which results in ngc2edif fails as shown in runme.log: Failed to load library libPort_ExecLoader.dll because of A dynamic link library (DLL) initialization routine failed.

 

Refer to the following links for solution:

https://forums.xilinx.com/t5/Design-Tools-Others/ngc2edif-fails-with-Vivado-2017-2-and-older-running-under-Win10/m-p/878880;

https://www.xilinx.com/support/answers/62380.html

 

You can find the files in this folder, C:\Xilinx\Vivado\201x.x\ids_lite\ISE\lib\nt64.

 

Thanks,

Andy

0 Kudos