cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
guo_bing
Adventurer
Adventurer
783 Views
Registered: ‎05-27-2019

How to make "dexplorer -w" works?

Jump to solution

I want to check the DPU info on my target system, but get fail:

 

root@ultra96:~# dexplorer -w
-bash: dexplorer: command not found
root@ultra96:~# dexplorer -v
-bash: dexplorer: command not found

 

 

My Ultra96 board running the image:

xilinx-ultra96-prod-dpu1.4-desktop-buster-2019-05-31.img.zip

It name has the word "dpu1.4",  should it has a DPU with the version is 1.4.0.x ?

but how many DPUs it build-in? and what DPU architecture is?(B4096 or B1152 or B2304 .... ?)

0 Kudos
1 Solution

Accepted Solutions
guo_bing
Adventurer
Adventurer
769 Views
Registered: ‎05-27-2019

I fail to install the DNNDK on target board. 

refer to ug1327, chapter 1, "Copying DNNDK Tools to the Evaluation Board "

OR

ug1354, chapter 3, "Installing DNNDK "

View solution in original post

0 Kudos
1 Reply
guo_bing
Adventurer
Adventurer
770 Views
Registered: ‎05-27-2019

I fail to install the DNNDK on target board. 

refer to ug1327, chapter 1, "Copying DNNDK Tools to the Evaluation Board "

OR

ug1354, chapter 3, "Installing DNNDK "

View solution in original post

0 Kudos