UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor zstibi
Visitor
253 Views
Registered: ‎06-15-2019

Artix-7 and JTAG programmers compatibility

Jump to solution

Is Platform Cable (not II, but DS300) compatible with Artix7 FPGA family and Vivado IDE?

If not, then which programmer device should I use?

 

Thanks,

Tibor

0 Kudos
1 Solution

Accepted Solutions
Highlighted
235 Views
Registered: ‎01-22-2015

Re: Artix-7 and JTAG programmers compatibility

Jump to solution

@zstibi 

Welcome to the Xilinx Forum!

Xilinx document UG908 (page 24) shows the programmers supported by the Vivado IDE v2019.1, which are:

• Xilinx® SmartLynq Data Cable (HW-SMARTLYNQ-G/DLC20)
• Xilinx Platform Cable USB II (DLC10)
• Xilinx Platform Cable USB (DLC9G, DLC9LP, DLC9)
• Digilent JTAG-HS1
• Digilent JTAG-HS2
• Digilent JTAG-HS3
• Digilent JTAG-SMT1
• Digilent JTAG-SMT2

These programmers can be used to program the Artix-7 FPGA.

Cheers,
Mark

2 Replies
Highlighted
236 Views
Registered: ‎01-22-2015

Re: Artix-7 and JTAG programmers compatibility

Jump to solution

@zstibi 

Welcome to the Xilinx Forum!

Xilinx document UG908 (page 24) shows the programmers supported by the Vivado IDE v2019.1, which are:

• Xilinx® SmartLynq Data Cable (HW-SMARTLYNQ-G/DLC20)
• Xilinx Platform Cable USB II (DLC10)
• Xilinx Platform Cable USB (DLC9G, DLC9LP, DLC9)
• Digilent JTAG-HS1
• Digilent JTAG-HS2
• Digilent JTAG-HS3
• Digilent JTAG-SMT1
• Digilent JTAG-SMT2

These programmers can be used to program the Artix-7 FPGA.

Cheers,
Mark

Visitor zstibi
Visitor
182 Views
Registered: ‎06-15-2019

Re: Artix-7 and JTAG programmers compatibility

Jump to solution

Thank you for the satisfactory answer!

0 Kudos