UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
75 Views
Registered: ‎06-25-2018

Can Vcco_65 be changed from 1.8V to 1.2V after configuration for Kintex UltraSCALE+

Hi all,

 

I want to configure the XCKU5P using Slave SelectMAP mode, which uses the HP Bank 65. As per the configuration document 1.8V is used for Vcco_0 and Vcco_65 before and during the configuration.

After the configuration is successful 

Is it allowed to change the Vcco_65 from 1.8V to 1.2V ?

If this is allowed what all should be taken care during the change in Vcco_65.

 

Thanks,

Saravanan

0 Kudos
1 Reply
Moderator
Moderator
24 Views
Registered: ‎01-15-2008

Re: Can Vcco_65 be changed from 1.8V to 1.2V after configuration for Kintex UltraSCALE+

0 Kudos