UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Serial Vector Format (SVF) File Programming for Zynq

Reply
Highlighted
Observer
Posts: 23
Registered: ‎07-13-2015

Serial Vector Format (SVF) File Programming for Zynq

Hello,

I would like to create svf file offline on Zynq component. For that, I used the documentation ug908-vivado-programming-debugging.pdf chapter 8. However, at the end of process, I have an error which said "Flash programming using SVF is not supported for Zynq Devices". 

Do you know how I can do?

Thanks

Best Regards

 

2018_09_14_14_24_00_Vivado_2018.2.jpg
Xilinx Employee
Posts: 369
Registered: ‎08-10-2008

回复: Serial Vector Format (SVF) File Programming for Zynq

hi c,

Here is a non-official supported workaround:
1. Type the following command in the tcl console: "set_param labtools.enableSVF 1"
2. When enable SVF file generation, click the box "Create SVF Only (no program operations)"

See if it can work then.

Thanks,
Ivy
------------------------------------------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
---------------------------------------------------------------------------------------------------------
Observer
Posts: 23
Registered: ‎07-13-2015

回复: Serial Vector Format (SVF) File Programming for Zynq

Hi Ivy,

 

I tried your workaround but it doesn't work. Please see the attachment. 

In the attachment, you can see the Tcl Console, and the error popup.

 

Thanks

Nicolas

2018_09_17_08_52_36_Vivado_2018.2.jpg