DNNDK for Avnet ZedBoard

[kavensun]

In recent post, the Deephi has released its DNNDK platform for Xilinx Zynq-7020 APSoC.

It only provide the support for DP-8000. As ZedBoard also adopt the Zynq-7020, is it possible to apply the DNNDK platform on ZedBoard?

[qhall]

@kavensunAt this time there is no out-of-the-box support for the Zedboard though I would agree that it would be possible to add this if the demand were sufficient.  Such support could even be added by the user provided you have access to the IP.  Have you considered the Ultra96?  Support for the Ultra96 is imminent.

[aluo]

@kavensunWe have released DNNDK v2.08 with Ultra96 board image in Deephi' website. Are you interested? 

[jackschora]

Is`t possible for us to implement DNNDK on other Zynq boards?

I thought it will help more developer to understand or use DNNDK.

[aluo]

@jackschorait is possible. Let us know which specific boards you are interested in. 

[jackschora]

Something like PYNQ ,or any boards serve for 7z020 and some light chip like artix a7 or so.

[toshas]

Get support for boards from XUP program or similar ones will be very cool!
zedboard, zybo, arty and so-on.

[sterlingrpi]

I also have a need to deploy an AI model on a low cost FPGA like the Zynq 7020. All the dev boards I see that are supported by DeePhi's DNNDK tutorials are for the UpScale+ which are too expensive.

Is the DP-8000 dev board still available? Are there examples and tutorials for using DNNDK on other Zynq 7000 series dev boards like the Pynq Z1 or Z2?

[aluo]

@sterlingrpiUnfortunately DP-8000 is EOL. But if you have DP-8000, you can continue to use it. The plan is to support Zedboard. 

It has not done yet. Stay tuned.