UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor cdischke
Visitor
10,848 Views
Registered: ‎08-19-2009

Component Ports in Planhead

Hi,

I`m using PlanAhead v11.1.

How can I find ports from a specific component in PlanAhead?

 

Best Regards

0 Kudos
2 Replies
Highlighted
Visitor vekin06
Visitor
10,747 Views
Registered: ‎05-21-2009

Re: Component Ports in Planhead

Hi,

 

Maybe this can help...

 

In ISE, it is possible to create "partitions" of some modules in your design (click right on your HDL file and "new partition").

 

If you do this, when you will import created netlists into your PlanAhead project, you will be able to see your module as separate block, and then you can use the schematic view to see ports (click right on your module instance and "schematic").

 

Best Regards

0 Kudos
Visitor sureshwar
Visitor
10,741 Views
Registered: ‎06-04-2009

Re: Component Ports in Planhead

When you synthesize set the option to keep hierarchy. Import this netlist into planahead.

 

You should be able to see the components as per the hierarchy of the HDL

 

hope this helps.

 

0 Kudos