UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
294 Views
Registered: ‎12-12-2009

Connecting a remote target through Xilinx SDx

Jump to solution

I need to configure the device remotely.

The device is powered on and connected to remote PC and Vivado hw_server is running as shown in the figure below:

hw_server.png

When I'm trying to connect to the device through local computer which runs Xilinx SDx, I get an error as Host is not reachable.

Screen Shot 2019-02-27 at 17.09.59 (2).png

However, I can connect from the same local machine to the same remote machine when I use iMPACT tool. What can be the problem?

abdullah
Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Explorer
Explorer
279 Views
Registered: ‎12-12-2009

Re: Connecting a remote target through Xilinx SDx

Jump to solution

I noticed that I can connect to the remote target even I get the error that I mentioned above.

abdullah
0 Kudos
1 Reply
Explorer
Explorer
280 Views
Registered: ‎12-12-2009

Re: Connecting a remote target through Xilinx SDx

Jump to solution

I noticed that I can connect to the remote target even I get the error that I mentioned above.

abdullah
0 Kudos