11-29-2017 10:37 PM
I have a custom board.I am using Vivado2017.2 on Windows 7. After generating a bitstream, I go to Hardware Manager => Open Target => Autoconnect and immediately get the error:
ERROR: [Labtools 27-2269] No devices detected on target localhost:3121/xilinx_tcf/Xilinx/00000000000000.
Check cable connectivity and that the target board is powered up then
use the disconnect_hw_server and connect_hw_server to re-register this hardware target.
ERROR: [Common 17-39] 'open_hw_target' failed due to earlier errors
I have also tried to run the command:
<Installed_area_vivado>\2017.2\bin\vcse_server.bat -port 60001
But it shows:
Thanks for any help.
12-17-2017 03:07 AM
11-29-2017 10:49 PM
11-30-2017 02:52 AM
11-30-2017 03:08 AM
But I don't use ZC702 Evaluation Kit Board,I design my board with Kintex-7 FPGA xc7k325tffg900-2,
when I Open Target => Autoconnect ，it shows No devices detected on target localhost:3121/xilinx_tcf/Xilinx/00000000000000.
I have read this link:https://www.xilinx.com/support/answers/61312.html
Does it mean that only the xilinx official Evaluation Kit Board can be detected while user's custom board can not be detected automaticlly?
11-30-2017 11:06 AM
If the chip is Xilinx, it should work ok (no matter if it's an official Evaluation Kit Board or user's custom board).
In the path localhost:3121/xilinx_tcf/Xilinx/00000000000000 those bunch of zeroes should actually be the device ID. In your case, the zeroes show that there is really something wrong with detecting the device.
Can you try to instead of hitting the autoconnect button, hit Open Target -> Open New Target.
It will open the Connect Hardware Wizard and when you click next, if devices have been detected, you should see something like this:
Please make sure the device is powered on. Also, what kind of cable are you using? Maybe try using another cable (just about any regular micro USB cable) just to make sure the cable is not the source of the problem.
11-30-2017 09:02 PM
When I hit Open Target--Open New Target,It shows：
The device is powered on.I have changed the cable but it still doesn't work.
11-30-2017 10:22 PM
I found that my device can be detected correctly in ISE14.7,So I think my custom board is ok.There must be something wrong in Vivado
12-01-2017 02:15 AM
I found that the device can be detected in ISE14.7,but can not be detected in Vivado，there must be something wrong with vivado.The cable and USB port is ok.
12-01-2017 01:49 PM - edited 12-01-2017 01:49 PM
Are you using the latest Vivado Drivers?
12-04-2017 12:24 AM
Where can I find the latest Vivado Driver？I install the driver from the software installation directory C:\Xilinx...
12-17-2017 03:07 AM
04-13-2018 06:09 PM
So I had the same problem but what I noticed was that it had nothing to do with the cable but when I unplugged USB cable from my USB hub and plugged it directly to PC it delivered the right current to power my board.
04-17-2018 02:06 AM
I'm trying to connect JTAG to the Zynq XC7Z045 via Digilent JTAG SMT2 module, but error occured as shown in jpeg file below.
Also how different is our custom design from ZC706 EVK is that we have removed the JTAG chain and using only Digilent module to access the port. But getting the error as shown below.
Please help me to resolve this ASAP.
11-12-2018 06:57 PM
im having this same issue, what is the fix to this ?