Design and Debug Techniques Blog

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Design and Debug Techniques Blog

aoifem
Moderator
Moderator

This blog entry is a continuation of Introduction to PetaLinux Part 1. It is aimed at anyone who wants to get started with PetaLinux and learn about its key tools, concepts, and capabilities. In the first blog entry we looked at how to create a PetaLinux project and how to modify an image. In the second blog entry, we will continue with the project created in Part 1 and look at how to build the system image and boot it on a Zynq® UltraScale+™ ZCU102 evaluation kit.

I will run through the basic steps needed in this tutorial, however, the scope of the blog is limited. You can find out more information about PetaLinux on the Xilinx website here

Read more...

more
4 0 1,668
aoifem
Moderator
Moderator

This blog is aimed at anyone who wants to get started with PetaLinux and learn about its key tools, concepts and capabilities. In the first blog entry, we will look at how to create a PetaLinux project, and how to modify an image. 

Read more...

more
12 0 14.3K