cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
a_yujin
Visitor
Visitor
409 Views
Registered: ‎04-13-2021

Baremetal Sata Driver for Ultrascale+ (zcu102)

Jump to solution

Hei!

I 'm studying Sata on the Ultrascale+ MPSoC. Can anyone share the source code of the baremetal driver? 

Thanks in advance.

 

0 Kudos
1 Solution

Accepted Solutions
aravindb
Moderator
Moderator
349 Views
Registered: ‎02-07-2018

HI @a_yujin 

Unfortunately we don’t have BareMetal driver support for SATA. As you know to support SATA ,we need to implement ahci and ata driver support in baremetal code & factory  not interested as we have already having support in Linux driver.

You can refer below link if you want to test in Linux : http://www.wiki.xilinx.com/SATA

You can find the list of BareMetal drivers support in this link:http://www.wiki.xilinx.com/Baremetal+Drivers+and+Libraries

 

Thanks & regards

Aravind

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
-------------------------------------------------------------------------------------------

View solution in original post

3 Replies
aravindb
Moderator
Moderator
350 Views
Registered: ‎02-07-2018

HI @a_yujin 

Unfortunately we don’t have BareMetal driver support for SATA. As you know to support SATA ,we need to implement ahci and ata driver support in baremetal code & factory  not interested as we have already having support in Linux driver.

You can refer below link if you want to test in Linux : http://www.wiki.xilinx.com/SATA

You can find the list of BareMetal drivers support in this link:http://www.wiki.xilinx.com/Baremetal+Drivers+and+Libraries

 

Thanks & regards

Aravind

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
-------------------------------------------------------------------------------------------

View solution in original post

a_yujin
Visitor
Visitor
322 Views
Registered: ‎04-13-2021

Hi, @aravindb 
Thanks for your reply!
I saw it already in another topic, but I need to study the work on bare metal. I saw that I was not alone in this question, so I asked it.

0 Kudos
dragonbka
Visitor
Visitor
172 Views
Registered: ‎05-29-2019

hi @aravindb. I try to write driver sata in baremetal in sdk 2017.4 and i am following ug1085 chapter 32 v2.1. I think the PS supported AHCI, is it right? Because i see u said that “ we need implement ahci and ata driver” so I feel confused about do the ps supported ahci. Thanks so much

0 Kudos