cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
pvranade
Contributor
Contributor
15,765 Views
Registered: ‎04-18-2012

SDK 14.4 can't find path to 'arm-xilinx-eabi-gcc'

Jump to solution

Hi,

 

I recently upgraded to 14.4.

I open an old project - which worked well with 14.3
Tried to compile again without making any changes,

and hit an error. Here is the log:


**** Build of configuration Debug for project led ****

make all
Building file: ../src/adc.c
Invoking: ARM gcc compiler
arm-xilinx-eabi-gcc -Wall -O0 -g3 -c -fmessage-length=0 -I../../freertos_bsp/ps7_cortexa9_1/include -MMD -MP -MF"src/adc.d" -MT"src/adc.d" -o"src/adc.o" "../src/adc.c"
'arm-xilinx-eabi-gcc' is not recognized as an internal or external command,
operable program or batch file.
make: *** [src/adc.o] Error 1


 

Now what?

I had downloaded 14.4 as 4 different files:

Xilinx_ISE_DS_14.4_P.49d.3.0-1.tar

Xilinx_ISE_DS_14.4_P.49d.3.0-2.zip.xz

Xilinx_ISE_DS_14.4_P.49d.3.0-3.zip.xz

Xilinx_ISE_DS_14.4_P.49d.3.0-4.zip.xz

 

Then checked their MD5 checksums, and they match.

Used 7-zip to extract the first file - which created xsetup.exe.

Then I simply ran xsetup.exe to complete the installation.


Did I do something wrong?

How to fix this?

 

Further, I opened "ISE Design Suite 64 bit Command Prompt" and

typed arm-xilinx-eabi-gcc and pressed Enter. It says "no input files".

i.e. arm-xilinx-eabi-gcc exists and the Command Prompt knows it's path.

Only SDK does not know the path. Why???

 

Regards,

 

Pramod Ranade

0 Kudos
1 Solution

Accepted Solutions
dchavir
Explorer
Explorer
20,113 Views
Registered: ‎05-12-2011
0 Kudos
11 Replies
dchavir
Explorer
Explorer
20,114 Views
Registered: ‎05-12-2011
0 Kudos
pvranade
Contributor
Contributor
15,753 Views
Registered: ‎04-18-2012

Thanks Doug!

It works when I launch SDK in standalone mode.

 

I had searched the forum (and google) for things like:

14.4 sdk arm-xilinx-eabi-gcc

but I could not get to this answer record.

 

Regards,

 

Pramod Ranade

0 Kudos
tcornall
Visitor
Visitor
15,601 Views
Registered: ‎09-29-2011

This can also be fixed by modifying the desktop shortcut for planahead and adding the settings64.bat (or settings32.bat) in front of the planahead.bat on the target line.

e.g. make Target: to be

 

"C:\Xilinx\14.4\ISE_DS\settings64.bat C:\Xilinx\14.4\ISE_DS\PlanAhead\bin\planAhead.bat"

 

or settings32.bat as appropriate for the installation paths on your machine.

 

Thanks heaps to previous posters for pointing out the basic problem, that the planahead launch is faulty as installed.

0 Kudos
pvranade
Contributor
Contributor
15,590 Views
Registered: ‎04-18-2012

Thanks tcornall!

With this simple change, now I can start SDK from PlanAhead and it works!

 

Regards,

 

Pramod Ranade

0 Kudos
15,514 Views
Registered: ‎12-21-2012

hi pramod

 

m using xilinx 14.1 now m running a simple inbuilt code "hello world" but it dose'nt show me a output in console window or even on hyperterminal.

 

plz help me.....and give me ur mail id...will mail u which doc m reffering 

0 Kudos
Anonymous
Not applicable
13,209 Views

Hi

 

I'm a beginner. As usual, I had installed ISE DS 14.5 and SDK 2013.1 and practiced some examples provided

by Zynq-7000 all programmable SoC: Concepts, Tools, and techniques Guide. Then the simple hello example

failed to be compiled due to this same issue. I tried to open SDK as standalone as suggested but without success.

 

I'm wondering whether the compiler is missing because I cannot find it. Do I need to install it separately ?

 

I'll appreciate any help.

 

Thanks - sungyung

 

0 Kudos
paulof91
Visitor
Visitor
13,041 Views
Registered: ‎02-08-2011

Hello, can someone explain me how do I run SDK standalone mode? And if I can continue from the same point I would running on PlanAhead tool? I'm just trying to follow "Hello World" tutorial from zedboard.org

 

Cheers

0 Kudos
paulof91
Visitor
Visitor
13,039 Views
Registered: ‎02-08-2011
PS: I'm running ISE 4.4 on win7 64b
0 Kudos
paulof91
Visitor
Visitor
12,941 Views
Registered: ‎02-08-2011

Never mind. I got it !

0 Kudos
mkpeker
Visitor
Visitor
3,883 Views
Registered: ‎12-18-2013

Could you tell me how you got it?

0 Kudos
mkpeker
Visitor
Visitor
3,850 Views
Registered: ‎12-18-2013

I solved it, thanks

0 Kudos