UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer kranthi018
Observer
252 Views
Registered: ‎07-02-2019

Zcu102 SDK 2018.2 thows error: Execution context is running

Hi,

I tried to implement simple hello world program by taking the reference from xilinx  UG 1209, initially i selected PS section and created as per the steps mentioned in the document where it uses simple Zynq ultra scale +MPSOC, generated hardware products and generated the hdf files and exported to the SDK 2018.2 and launched , I opened the Terrminal window and connected USB cable to the machine and connected and then when  i run the .elf files (PSU_init_tcl) and test_a53 .elf files.

Then SDK throws error message : Execution context running, I could not able to connect to the debugger followed step by step process from UG1209.

0 Kudos
7 Replies
Highlighted
Xilinx Employee
Xilinx Employee
218 Views
Registered: ‎10-12-2018

Re: Zcu102 SDK 2018.2 thows error: Execution context is running

Hi @kranthi018 ,

The problem might be related to DDR4 DIMM changing as discussed on https://www.xilinx.com/support/answers/71961.html.

If you are using new a new DIMM ZCU102, please use SDK 2018.3

Please refer the below post to fix the issue.

https://forums.xilinx.com/t5/Evaluation-Boards/Hello-World-on-ZCU102/m-p/959547?collapse_discussion=true&filter=location&location=category:XlnxProd&q=71961&search_type=thread

Thanks & Regards
Anil B
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Observer kranthi018
Observer
178 Views
Registered: ‎07-02-2019

Re: Zcu102 SDK 2018.2 throws error: Execution context is running

Im using the ZCu102 board no: 0484192 04

EK-U1-ZCu102-G

Do i need to configure settings in DDR memory configurations

 

0 Kudos
Xilinx Employee
Xilinx Employee
151 Views
Registered: ‎10-12-2018

Re: Zcu102 SDK 2018.2 throws error: Execution context is running

Hi @kranthi018 ,

Yes, you need to change the DDR configuration. Or use new FSBL generated from SDK 2018.3 or later.

Thanks & Regards
Anil B
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Observer kranthi018
Observer
139 Views
Registered: ‎07-02-2019

Re: Zcu102 SDK 2018.2 throws error: Execution context is running

Hi,
Can you give the procedure to change the DDR configuration,
or how to generate the FSBL procedure since I tried from the document UG1209, I tried with Xilinx vivado 2018.2 , but if I try with vivado 2018.3 can I get the hello world application successful.
0 Kudos
Xilinx Employee
Xilinx Employee
125 Views
Registered: ‎10-12-2018

Re: Zcu102 SDK 2018.2 throws error: Execution context is running

Hi @kranthi018 ,

Please check this wiki for how to creat a FSBL from SDK.

You need to change the PCW IP settings according to the new DIMM parameters from Vivado as mentioned in AR-71961.DIMM_2018.2.PNG

Can you please download and try with prebuilt imgaes of zcu102, version sdk 2018.2 and 2018.3 from this Wiki .

Thanks & Regards
Anil B
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Observer kranthi018
Observer
104 Views
Registered: ‎07-02-2019

Now I changed to SDk2018.3 trying to execute heelo world example from UG1209, my boardno:0484192 04,do i need to change DDR configurations

Hi,

Now I changed SDk2018.3 trying to execute hello world example from UG1209, my boardno:0484192 04,do i need to change DDR configurations?

Here by please find the attached project folder which was created according to the steps from UG 1209, but through this hello        word  is not displayed on the terminal, please help and guide us.

Actually main intention is we wanted to send the data from host PC to the IP integrated in the PL section, before that we are doing small exercise to send the data from terminal to the PS section and get the data back on to the terminal, please help

0 Kudos
Observer kranthi018
Observer
87 Views
Registered: ‎07-02-2019

Re: Zcu102 SDK 2018.2 throws error: Execution context is running

Hi,
Even I changed the DDR configurations in the vivado 2018.3 , as per the above mentioned configurations, still Iam unable to get the Hello world displayed on the terminal, please help us, even I tried with FSBL method from your earlier references, please check and update it.
0 Kudos