cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
shweta_agnihotri
Adventurer
Adventurer
6,656 Views
Registered: ‎04-26-2012

bsp creating problem in v2014.4 sdk

sir

in v2014.4 after importing hardware file in SDK , it is not allowing to make BSP file.

 

and showing error : BSP is not generating , see SDK run log file....

thanks
shweta
space appplication center
ahmedabad
0 Kudos
6 Replies
htsvn
Xilinx Employee
Xilinx Employee
6,625 Views
Registered: ‎08-02-2007

hi,

 

the SDK.log is not attached. Also can you attach the xml/hdf of your design?

 

--hs

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
shweta_agnihotri
Adventurer
Adventurer
6,483 Views
Registered: ‎04-26-2012

sri

 plz reply my query. I have also attached sdk log file and hdf file , but no solution received since then.

 

thanks and regard

 

shweta

apace applicaton center

ahmedabad 

thanks
shweta
space appplication center
ahmedabad
0 Kudos
htsvn
Xilinx Employee
Xilinx Employee
6,475 Views
Registered: ‎08-02-2007

hi

 

the files are not attached for further debug.

 

can you attach them again?

 

--hs

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
shweta_agnihotri
Adventurer
Adventurer
6,429 Views
Registered: ‎04-26-2012

sir

I am attaching files again.

thanks
shweta
space appplication center
ahmedabad
0 Kudos
htsvn
Xilinx Employee
Xilinx Employee
6,222 Views
Registered: ‎08-02-2007

hi,

 

this is not the xml i am looking for. when you export the hardware to SDK, there will be a HDF/XML file generated.

 

can you share that?

 

Also share the bd.tcl file of your project.

 

--hs

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
shweta_agnihotri
Adventurer
Adventurer
6,196 Views
Registered: ‎04-26-2012

sir

I am attaching files.. which hdf file u r looking for ....


there are  2 files generating ..... when I export the hardware .. I am attaching both


1-- SDK / kc705_fmc150.hdf

2--- hwplatform_0 / system.hdf

 

it is giving the following error while attaching documents

 

Correct the highlighted errors and try again.

  • The attachment's design_1_bd.tcl content type (text/plain) does not match its file extension and has been removed.
    The attachment's KC705_fmc150.hdf content type (application/x-zip-compressed) does not match its file extension and has been removed.
    The attachment's system.hdf content type (application/x-zip-compressed) does not match its file extension and has been removed
thanks
shweta
space appplication center
ahmedabad
0 Kudos