create an IP from the VHDL code using EDK (XPS)

[ka3bouri]

I have the vhdl code of my project that uses a library   that I have writing it  by myself.
by creating the IP in the project xps I had problems with:
1 / the addition of libraries
2 / the location of the VHDL code
how I'm going to do,  have you a tutorial explaining
please help 

[luisb · Accepted solution]

I would look at page 45 off the CTT:

http://www.xilinx.com/support/documentation/sw_manuals/xilinx13_3/edk_ctt.pdf