UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer jorsong
Observer
2,640 Views
Registered: ‎06-04-2009

edk can't use ise ipcore

Jump to solution

I'm using ise edk 9.1i,.

I generated a custom Ip core in edk, and edit it in ise with ..I use ise generate a fifo with fifo generator,instantiate in my ise project,I can  synthesize it correctly in ise...but when I use edk to synthesize ,it tells me the fifo that I generated in ise can not be resolved.......

 

how to use ise ip core correctly in edk....help me please....

 

Thanks a lot!!! 

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
3,133 Views
Registered: ‎08-13-2007

Re: edk can't use ise ipcore

Jump to solution

You may find this thread helpful:

http://forums.xilinx.com/xlnx/board/message?board.id=EDK&message.id=5634 (Put Coregen component into EDK library?)

 

Cheers,

bt

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
3,134 Views
Registered: ‎08-13-2007

Re: edk can't use ise ipcore

Jump to solution

You may find this thread helpful:

http://forums.xilinx.com/xlnx/board/message?board.id=EDK&message.id=5634 (Put Coregen component into EDK library?)

 

Cheers,

bt

0 Kudos