cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
zvivered
Adventurer
Adventurer
200 Views
Registered: ‎09-30-2017

2018.3 : Launch R5 right after system.bit loaded

Jump to solution

Hello,

How can I make sure R5 start running only after system.bit is loaded ?

My system.bit and ELF for R5 are both in my BOOT.BIN. 

Thank you,

Zvika 

0 Kudos
1 Solution

Accepted Solutions
aravindb
Moderator
Moderator
129 Views
Registered: ‎02-07-2018

HI @zvivered 

Please create a BOOT.BIN using this below bif file. It should work.

 

//arch = zynqmp; split = false; format = BIN
the_ROM_image:
{
[fsbl_config]a53_x64
[bootloader]zynqmp_fsbl.elf
[destination_cpu = pmu]pmufw.elf
[destination_device = pl]system.bit
[destination_cpu = r5-0]app.elf
}

 

Thanks & regards

Aravind

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
-------------------------------------------------------------------------------------------

 

View solution in original post

0 Kudos
1 Reply
aravindb
Moderator
Moderator
130 Views
Registered: ‎02-07-2018

HI @zvivered 

Please create a BOOT.BIN using this below bif file. It should work.

 

//arch = zynqmp; split = false; format = BIN
the_ROM_image:
{
[fsbl_config]a53_x64
[bootloader]zynqmp_fsbl.elf
[destination_cpu = pmu]pmufw.elf
[destination_device = pl]system.bit
[destination_cpu = r5-0]app.elf
}

 

Thanks & regards

Aravind

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
-------------------------------------------------------------------------------------------

 

View solution in original post

0 Kudos