Hi,
I have problem in booting petalinux from virtual machine. It shows two ports at which the board is connected.
peter@peter:~$ dmesg | grep -i FTDI
[ 217.579044] usbcore: registered new interface driver ftdi_sio
[ 217.579052] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 217.579073] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 217.614060] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 217.614126] ftdi_sio 1-1:1.1: FTDI USB Serial Device converter detected
[ 217.654584] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB1
Not sure at which port ZYBO is connected. I have tried both ttyUSB0 and ttyUSB1 but not able to see the response from ZYBO.
Here is what I see on the Ubuntu terminal.
peter@peter:~/opt/xilinx/petalinux/projects/zybo-7z-20-project-1/zynq-os$ petalinux-boot --jtag --prebuilt 3
WARNING: Will not program bitstream on the target. If you want to program bitstream,
WARNING: please run petalinux-package --prebuilt to put the bitstream to the prebuitl directory,
WARNING: or use --fpga --bitstream option to specify a bitstream.
INFO: Append dtb - /home/peter/opt/xilinx/petalinux/projects/zybo-7z-20-project-1/zynq-os/pre-built/linux/images/system.dtb and other options to boot zImage
INFO: Launching XSDB for file download and boot.
INFO: This may take a few minutes, depending on the size of your image.
rlwrap: warning: your $TERM is 'xterm-256color' but rlwrap couldn't find it in the terminfo database. Expect some problems.: Inappropriate ioctl for device
no targets found with "name =~ "arm*#0"". available targets: none
while executing
"error "no targets found with \"$params(filter)\". available targets:$target_list""
(procedure "targets" line 177)
invoked from within
"targets -set -nocase -filter {name =~ "arm*#0"}"
(file "/tmp/tmp.WNR7uiQyxv" line 3)
INFO: The XSDB log is as follows
attempting to launch hw_server
****** Xilinx hw_server v2018.3
**** Build date : Nov 15 2018-19:35:59
** Copyright 1986-2018 Xilinx, Inc. All Rights Reserved.
INFO: hw_server application started
INFO: Use Ctrl-C to exit hw_server application
INFO: To connect to this hw_server
Here are all the image files in pre-built folder
peter@peter:~/opt/xilinx/petalinux/projects/zybo-7z-20-project-1/zynq-os/pre-built/linux/images$ ls
BOOT.BIN system.bit system.dtb System.map.linux u-boot.elf zImage zynq_fsbl.elf
