UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
711 Views
Registered: ‎02-08-2018

Cannot clone git://git.xilinx.com/microblaze-gnu.git

Jump to solution

I am trying to download and install the MicroBlaze GNU compiler so that I can run a MicroBlaze application outside of the Xilinx SDK platform and on the Linux command line.  I tried following directions on this website: http://xilinx.wikidot.com/mb-gnu-tools

 

When I enter: git clone git://git.xilinx.com/microblaze-gnu.git

I get the following error:  fatal: unable to connect to git.xilinx.com:
                                            git.xilinx.com[0: 149.199.60.62]: errno=Connection timed out

Our IT person says that there is nothing wrong with our server.  I also tried disabling the firewall with the command "ufw disable" and restarting the computer, but still the same error.

 

Any suggestions?

Thanks

0 Kudos
1 Solution

Accepted Solutions
Scholar watari
Scholar
827 Views
Registered: ‎06-16-2013

Re: Cannot clone git://git.xilinx.com/microblaze-gnu.git

Jump to solution

Hi @agailey

 

I'm not sure. But Xilinx doesn't accept to open "git" port.

So, I suggest to use other protocol (ex. http or https) instead of git protocol.

 

BTW, if you want to use microblaze-gnu-gcc, I suggest to install petalinux or XSDK...

 

Best regards,

0 Kudos
2 Replies
Highlighted
Moderator
Moderator
689 Views
Registered: ‎12-04-2016

Re: Cannot clone git://git.xilinx.com/microblaze-gnu.git

Jump to solution

Hi

 

If you have petalinux installed at your end. Just try to run source settings.sh of petalinux, this will have microblaze and ARM toolchains, as petalinux is shipped with these toolchains.

 

 

Best Regards

Shabbir

0 Kudos
Scholar watari
Scholar
828 Views
Registered: ‎06-16-2013

Re: Cannot clone git://git.xilinx.com/microblaze-gnu.git

Jump to solution

Hi @agailey

 

I'm not sure. But Xilinx doesn't accept to open "git" port.

So, I suggest to use other protocol (ex. http or https) instead of git protocol.

 

BTW, if you want to use microblaze-gnu-gcc, I suggest to install petalinux or XSDK...

 

Best regards,

0 Kudos