UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
3,005 Views
Registered: ‎04-10-2016

How do you modify the JTAG speed in Vivado or SDk?

I want to increase the speed of writing flash by JTAG.

0 Kudos
2 Replies
Scholar rfs613
Scholar
2,978 Views
Registered: ‎05-28-2013

Re: How do you modify the JTAG speed in Vivado or SDk?

JTAG clock speed is controlled by the JTAG pod, not the Zynq. Some allow configuring the speed, others have a fixed value. Note that maximum speed may be limited by your Zynq board design, or the length of JTAG cables.

It is much faster to program flash from Linux (or even from uboot). I would recommend programming just FSBL and uboot via JTAG. Then you can either use network to fetch zImage and a ramdisk, or you can transfer data into RAM (much faster than into flash) and use uboot "sf" command to write it to flash.
0 Kudos
Adventurer
Adventurer
2,942 Views
Registered: ‎04-10-2016

Re: How do you modify the JTAG speed in Vivado or SDk?

thanks

0 Kudos