UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor srg1000
Visitor
470 Views
Registered: ‎11-14-2018

No rule to make target `zynq_zc702_config'.

Currently have an issue building u-boot where the error is :

make: *** No rule to make target `zynq_zc702_config'.  Stop.

The env was setup using the following steps :

 

  mkdir <working_dir>

 cd <working_dir>

  git clone <local-server>/rdp-linux-bsp.git

  git checkout bsp-3.1.1-dev

  source /opt/petalinux-v2017.2-final/settings.sh

  umask a+rx

  make cleanall

  make clean

  make

  Download/clone u-boot repository at <work_dir>/u-boot

   git clone git@<local-server>/u-boot-xlnx.git

   Run petalinux-config and setup u-boot url

   file:///user/xxxx/<working_dir>/u-boot/u-boot-xlnx

   cd to <working_dir>

   make   < then error occurs

   also, other errors occur when executing

   petalinux-build –c u-boot –x mrproper #deletes u-boot build directory

  

 

 

0 Kudos
2 Replies
Highlighted
Explorer
Explorer
392 Views
Registered: ‎02-22-2012

Re: No rule to make target `zynq_zc702_config'.

The u-boot configs entry is zynq_zc702_defconfig.

Check what you have in petalinux-config u-boot Configuration ---> u-boot config target entry.

This could be the reason for u-boot failure.

0 Kudos
Explorer
Explorer
363 Views
Registered: ‎06-03-2015

Re: No rule to make target `zynq_zc702_config'.

Hi

This error log is from Make file

1. Directory from where you are issuing Make is wrong 

2. zynq_zc702_config is not available 

 

Thanks & Regards

Satish G  

G Satish Kumar
0 Kudos