UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor ztmm
Visitor
371 Views
Registered: ‎05-08-2018

Petalinix and Xylon logiCVC ML - How to include and build

 

Anyone with information adding the Xylon LogicCVC-ML driver into Petalinux?

 

I followed this:

https://www.logicbricks.com/Documentation/Datasheets/SW/Xylon-Linux-FrameBuffer.pdf

 

% petalinux-config -c kernel

 

and get eventually to menuconfig.

 

Device Drivers->Graphics Support->Frame buffer devices->

 

and I was expecting to see:  Xylon logiCVC frame buffer support

 

The kernel source code has no fbdev/xylon.

 

I do have the IPCore for my Zynq 7020 hardware which can run non-linux OS.

I am just want to get Petalinux on this hardware. It builds and runs with  enough support of storage and serial port.

 

Question:

How do I get the Xylon LogiCVC support included in Petalinux build?

Do I have to explicitly download this from  https://github.com/logicbricks.?

 

Thanks

 

 

0 Kudos