cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
887 Views
Registered: ‎02-15-2015

VNC remote desktop client on Ultra96 Petalinux

Jump to solution

Hi,

 

I am trying to install a VNC client on the Petalinux distribution running on my Ultra96 board.

Does anyone know how to install one? Any VNC-compatible client should work, but I cannot seem to find one in the existing sample image.

 

In the Chromium browser, I tried to install a RealVNC Chrome extension but that has some compatibility issue with the browser.

On the command-line, I used smart search '*vnc*' to search for one, but no results were returned.

 

If anyone has tips on how to find, install and run a VNC client on this board, I would greatly appreciate it!

 

Thanks,

Harnhua



Fast FPGA design optimization at Plunify
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
902 Views
Registered: ‎04-24-2017

Hi @harnhua,

 

Add this to <plnx-proj-root>/project-spec/meta-user/conf/petalinuxbsp.conf

 

IMAGE_INSTALL_append += " tigervnc"

Refer http://tigervnc.org/ http://cgit.openembedded.org/meta-openembedded/tree/meta-oe/recipes-graphics/tigervnc/tigervnc_1.8.0.bb?h=rocko for more details.

Thanks,
Sandeep
PetaLinux Yocto | Embedded SW Support

---------------------------------------------------------------------------
Don’t forget to Reply, Kudo, and Accept as Solution.
---------------------------------------------------------------------------

View solution in original post

0 Kudos
2 Replies
Highlighted
Moderator
Moderator
903 Views
Registered: ‎04-24-2017

Hi @harnhua,

 

Add this to <plnx-proj-root>/project-spec/meta-user/conf/petalinuxbsp.conf

 

IMAGE_INSTALL_append += " tigervnc"

Refer http://tigervnc.org/ http://cgit.openembedded.org/meta-openembedded/tree/meta-oe/recipes-graphics/tigervnc/tigervnc_1.8.0.bb?h=rocko for more details.

Thanks,
Sandeep
PetaLinux Yocto | Embedded SW Support

---------------------------------------------------------------------------
Don’t forget to Reply, Kudo, and Accept as Solution.
---------------------------------------------------------------------------

View solution in original post

0 Kudos
Observer
Observer
828 Views
Registered: ‎02-15-2015

Thank you, we will give this a try.

 

Regards,

Harnhua



Fast FPGA design optimization at Plunify
0 Kudos