UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Participant kayas257
Participant
470 Views
Registered: ‎06-03-2018

Yocto petalinux image

Jump to solution

Hello,

I have been trying to build a petalinux image using yocto, problem I am facing is to generate kernel fit image using yocto build system

Kernel fit image=kernel+ramdisk+devicetree

Can someone help me on this.

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
Participant kayas257
Participant
389 Views
Registered: ‎06-03-2018

Re: Yocto petalinux image

Jump to solution

Hello,

Thanks for reply.

I found the solution in the following link

https://forums.xilinx.com/t5/Embedded-Linux/ZCU102-Yocto-BOOT-bin-generation/td-p/897696

 

Thanks & Regards,

Kayas

0 Kudos
3 Replies
Moderator
Moderator
394 Views
Registered: ‎09-12-2007

Re: Yocto petalinux image

Jump to solution

You can create the fit image manually, and use mkimage to create the image

Steps are shown here

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841722/ZCU102+Image+creation+in+OSL+flow

 

This can be done in yocto too. I'll dig out the recipe later.

0 Kudos
Highlighted
Explorer
Explorer
393 Views
Registered: ‎06-03-2015

Re: Yocto petalinux image

Jump to solution

Hi

check the yocto meta-**** layers support added in the build system & .conf file

output is in output/target/images/***.fit images 

Thnaks & Regards

Satish G

G Satish Kumar
0 Kudos
Participant kayas257
Participant
390 Views
Registered: ‎06-03-2018

Re: Yocto petalinux image

Jump to solution

Hello,

Thanks for reply.

I found the solution in the following link

https://forums.xilinx.com/t5/Embedded-Linux/ZCU102-Yocto-BOOT-bin-generation/td-p/897696

 

Thanks & Regards,

Kayas

0 Kudos