03-22-2021 06:30 AM
I have developed a Vivado project and tested it with baremetal appliation on ZynqMPSOC it works fine.
But whenever i biuld the petalinux image using the same xsa file and try to boot it hangs at...
irq-xilinx: /amba_pl@/interrupt-control@a0030000: num_irq=2, edge=0x3
I have attached the boot log and the pdf of block design.
Please check and let me know what am i missing ?
03-23-2021 10:09 PM
Yes It hangs there all the time.. I amusing this command to boot linux via JTAG
petalinux-boot --jtag --u-boot --fpga --bitstream ./images/linux/system.bit --image ./images/linux/image.ub
03-25-2021 11:28 PM
Hi @stephenm ,
I tried md a0030000 but that doesn't work.
Please find the attached tcl dump you asked for.
I replaced AXIGPIOs with EMIOs and linux is booting fine, but i want to use only AXIGPIOs not EMIOs.
I don't know what's wrong with AXIGPIOs in my project.