cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
3,777 Views
Registered: ‎09-28-2016

why hotkey ctrl-c cann't work?

Jump to solution

Hi,all

 

I use petalinux-2016.02 on board zc706, when I run a command, e.g. ping 192.168.1.100, or myself application, the console cann't be interrupted by hot key "ctrl-c", and "ctrl-z" also don't work? 

 

why? how can I fix this issue?

 

 

Tom

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Adventurer
Adventurer
7,187 Views
Registered: ‎09-28-2016

when I changed to petalinux2015.4, it was ok!!!

View solution in original post

0 Kudos
2 Replies
Highlighted
Xilinx Employee
Xilinx Employee
3,761 Views
Registered: ‎08-01-2008
check this guide
https://www.xilinx.com/support/documentation/sw_manuals/petalinux2013_10/ug982-petalinux-system-simulation.pdf
Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
0 Kudos
Highlighted
Adventurer
Adventurer
7,188 Views
Registered: ‎09-28-2016

when I changed to petalinux2015.4, it was ok!!!

View solution in original post

0 Kudos