cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
senkoo
Observer
Observer
886 Views
Registered: ‎08-28-2018

zc702 2017.4 Cant type in kernel when login prompts

Jump to solution

sa

0 Kudos
1 Solution

Accepted Solutions
senkoo
Observer
Observer
855 Views
Registered: ‎08-28-2018

Hello to everybody reading this,

 

If you have the same problem do this:

 

If you use xSDB to debug you may have problem with the CPU idle. Here is a link to that post for the fix :):

https://forums.xilinx.com/t5/Embedded-Linux/Petalinux-hanging-just-as-login-prompt-appears/m-p/853020/highlight/false#M25802

 

If you use a custom board do this:

1: Petalinux-config

2: Go to DTG Settings

3: Go to board name and set to : "template".

 

I got this from:

https://forums.xilinx.com/t5/Embedded-Linux/PetaLinux-hangs-at-login-prompt-on-zynq-7000/td-p/881499

 

I hope this can help somebody :)

View solution in original post

0 Kudos
3 Replies
gudishak
Moderator
Moderator
882 Views
Registered: ‎06-27-2017

Hi @senkoo,

 

Have you added PL bitstream in your Boot image? if not, Can you try adding it?

 

 

Regards
Kranthi
--------------------------
Don't forget to reply, kudo, and accept as solution.

Best Regards
Kranthi
--------------------------
Don't forget to reply, kudo, and accept as solution.
0 Kudos
senkoo
Observer
Observer
879 Views
Registered: ‎08-28-2018

Hello @gudishak,

 

Thank you for your response.

 

I build my project using:

petalinux-build and then
petalinux-package --force --boot --fsbl zynq_fsbl.elf --fpga ../../POC1.bit --u-boot.

Is that what you mean? Im really new to all of this.

0 Kudos
senkoo
Observer
Observer
856 Views
Registered: ‎08-28-2018

Hello to everybody reading this,

 

If you have the same problem do this:

 

If you use xSDB to debug you may have problem with the CPU idle. Here is a link to that post for the fix :):

https://forums.xilinx.com/t5/Embedded-Linux/Petalinux-hanging-just-as-login-prompt-appears/m-p/853020/highlight/false#M25802

 

If you use a custom board do this:

1: Petalinux-config

2: Go to DTG Settings

3: Go to board name and set to : "template".

 

I got this from:

https://forums.xilinx.com/t5/Embedded-Linux/PetaLinux-hangs-at-login-prompt-on-zynq-7000/td-p/881499

 

I hope this can help somebody :)

View solution in original post

0 Kudos