UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor mrzhang_
Visitor
2,953 Views
Registered: ‎11-26-2017

zcu102 petalinux2017.2 X11 is not work.

Jump to solution

HI!

      I used rdf0429-zcu102-es2-base-trd-2017-2-rev2 project.

      I  haved use below commands to enabled x11 and mali. But when i run startx command ,i meet some errors in below.


$ Petalinux-config -c rootfs
enable the following packages:
Filesystem Packages > libs> libmali-xlnx > libmali-xlnx
Filesystem Packages > libs > libmali-xlnx > libmali-xlnx-dev
Filesystem Packages > misc > packagegroup-petalinux-x11 > packagegroup-petalinux-x11
Filesystem Packages > misc > packagegroup-petalinux-x11 > packagegroup-petalinux-x11-dev

 

 

Errors:

 

hostname: zcu102_base_trd: Unknown host
xauth:  file /home/root/.serverauth.2449 does not exist


X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-573.el6.x86_64 x86_64
Current Operating System: Linux zcu102_base_trd 4.9.0 #1 SMP Mon Dec 4 11:09:52 CST 2017 aarch64
Kernel command line: earlycon clk_ignore_unused earlyprintk uio_pdrv_genirq.of_id=xlnx,generic-uio cma=1024M
Build Date: 19 June 2017  09:37:47PM
 
Current version of pixman: 0.34.0
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.6.log", Time: Mon Dec  4 10:15:58 2017
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
/etc/X11/xinit/xinitrc: line 51: twm: command not found
/etc/X11/xinit/xinitrc: line 52: xclock: command not found
/etc/X11/xinit/xinitrc: line 53: xterm: command not found
/etc/X11/xinit/xinitrc: line 55: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 54: xterm: command not found
xinit: connection to X server lost

waiting for X server to shut down X: ../../xorg-server-1.18.4/include/privates.h:122: dixGetPrivateAddr: Assertion `key->init.

 

 

Who can help me? thanks .

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
4,042 Views
Registered: ‎04-24-2017

Re: zcu102 petalinux2017.2 X11 is not work.

Jump to solution

Hi @mrzhang_,

 

It's not like the driver checking the list of monitors and figuring out if it's supported or not. By providing the list, we wanted to clearly communicate that some arbitrary monitor may not work with ZCU102 DP controller. But that doesn't also mean that it'll never work. it may work, but Xilinx doesn't guarantee that.

Thanks,
Sandeep
PetaLinux Yocto | Embedded SW Support

---------------------------------------------------------------------------
Don’t forget to Reply, Kudo, and Accept as Solution.
---------------------------------------------------------------------------

View solution in original post

0 Kudos
9 Replies
Visitor mrzhang_
Visitor
2,910 Views
Registered: ‎11-26-2017

Re: zcu102 petalinux2017.2 X11 is not work.

Jump to solution

There is no people meet this error?

0 Kudos
Moderator
Moderator
2,884 Views
Registered: ‎04-24-2017

Re: zcu102 petalinux2017.2 X11 is not work.

Jump to solution

Hi @mrzhang_,

 

To get started you can download ZCU102 BSP from https://www.xilinx.com/member/forms/download/xef.html?filename=xilinx-zcu102-v2017.2-final.bsp&akdm=1 and enable MALI and X11 it works.

 

 

Thanks,
Sandeep
PetaLinux Yocto | Embedded SW Support

---------------------------------------------------------------------------
Don’t forget to Reply, Kudo, and Accept as Solution.
---------------------------------------------------------------------------
0 Kudos
Visitor mrzhang_
Visitor
2,879 Views
Registered: ‎11-26-2017

Re: zcu102 petalinux2017.2 X11 is not work.

Jump to solution
I do these for ZCU102 BSP ?
$ Petalinux-config -c rootfs
enable the following packages:
Filesystem Packages > libs> libmali-xlnx > libmali-xlnx
Filesystem Packages > libs > libmali-xlnx > libmali-xlnx-dev
Filesystem Packages > misc > packagegroup-petalinux-x11 > packagegroup-petalinux-x11
Filesystem Packages > misc > packagegroup-petalinux-x11 > packagegroup-petalinux-x11-dev
0 Kudos
Visitor mrzhang_
Visitor
2,878 Views
Registered: ‎11-26-2017

Re: zcu102 petalinux2017.2 X11 is not work.

Jump to solution

Hi @sandeepg.
Can you help me look this title.
Is monitor not compatible for zcu102 drm drivers?
https://forums.xilinx.com/t5/Emb edded-Linux/Zynqmp-xorg-log-file/td-p/813347

0 Kudos
Moderator
Moderator
2,859 Views
Registered: ‎04-24-2017

Re: zcu102 petalinux2017.2 X11 is not work.

Jump to solution

Hi @mrzhang_,

 

Refer this AR for the *supported* DP monitors which works with drm driver.

 

https://www.xilinx.com/support/answers/68671.html

 

I use Dell U2414Hb.

 

*supported* => tested and validated by Xilinx.

Thanks,
Sandeep
PetaLinux Yocto | Embedded SW Support

---------------------------------------------------------------------------
Don’t forget to Reply, Kudo, and Accept as Solution.
---------------------------------------------------------------------------
0 Kudos
Visitor mrzhang_
Visitor
2,853 Views
Registered: ‎11-26-2017

Re: zcu102 petalinux2017.2 X11 is not work.

Jump to solution

Hi @sandeepg :

      If my monitor is not compatible for  current  Linux DRM driver. Is it possible that  I can  fix this bug by changing Linux DRM source code?  If i can,can you point out where it is?

     Thanks.

0 Kudos
Moderator
Moderator
4,043 Views
Registered: ‎04-24-2017

Re: zcu102 petalinux2017.2 X11 is not work.

Jump to solution

Hi @mrzhang_,

 

It's not like the driver checking the list of monitors and figuring out if it's supported or not. By providing the list, we wanted to clearly communicate that some arbitrary monitor may not work with ZCU102 DP controller. But that doesn't also mean that it'll never work. it may work, but Xilinx doesn't guarantee that.

Thanks,
Sandeep
PetaLinux Yocto | Embedded SW Support

---------------------------------------------------------------------------
Don’t forget to Reply, Kudo, and Accept as Solution.
---------------------------------------------------------------------------

View solution in original post

0 Kudos
Highlighted
Visitor mrzhang_
Visitor
2,765 Views
Registered: ‎11-26-2017

Re: zcu102 petalinux2017.2 X11 is not work.

Jump to solution

@sandeepg

Thank you very much! But now, I don't  solve my problem.

0 Kudos
Observer xyj_dreamer
Observer
1,615 Views
Registered: ‎09-04-2017

Re: zcu102 petalinux2017.2 X11 is not work.

Jump to solution

hi, I also have this problem, and do you solved this problem?

0 Kudos