UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Participant zguo
Participant
2,155 Views
Registered: ‎05-19-2017

AXI smartconnect buffering

Jump to solution

What is the expected behavior of the smartconnect if I issue too many requests that they overrun the internal buffering? Are the respective slave ready signals supposed to go low to force me to wait until more space is available, or do I just get a SLVERR response on the bresp/rresp buses?

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
3,822 Views
Registered: ‎02-26-2014

Re: AXI smartconnect buffering

Jump to solution

Hi,

 

Any AXI interconnect/slave, when it reached maximum acceptance, it de-asserts corresponding 'ready' signal.

And if this happens with the interconnect, the transaction may not reach the slave itself, depending on its implementation.

 

Regards,

Ravi

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
3,823 Views
Registered: ‎02-26-2014

Re: AXI smartconnect buffering

Jump to solution

Hi,

 

Any AXI interconnect/slave, when it reached maximum acceptance, it de-asserts corresponding 'ready' signal.

And if this happens with the interconnect, the transaction may not reach the slave itself, depending on its implementation.

 

Regards,

Ravi

0 Kudos