UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Adventurer
Adventurer
83 Views
Registered: ‎11-08-2017

How to connect registers to MicroBlaze?

Hi All,

How to connect registers to the MicroBlaze processor?

Should the registers be connected through the AXI bus? Is there a design example?

Thank you!

 

0 Kudos
2 Replies
Mentor hgleamon1
Mentor
67 Views
Registered: ‎11-14-2011

Re: How to connect registers to MicroBlaze?

 

You need to provide more detail about what you are trying to do.

What registers? What version of Microblaze? What does your (sub)system architecture look like?

----------
"That which we must learn to do, we learn by doing." - Aristotle
0 Kudos
Xilinx Employee
Xilinx Employee
34 Views
Registered: ‎07-12-2018

Re: How to connect registers to MicroBlaze?

Hi @dmitryl_home,

 

You have to connect that to an AXI Interconnect and connect that interconnect to the VDMA.

Follow the below link for the example design.

https://www.xilinx.com/support/documentation/application_notes/xapp1218-axi-vdma-for-kc705.pdf

Best Regards
Abhinay PS
------------------------------------------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give kudos to a post which you think is helpful and reply oriented.
-------------------------------------------------------------------------------------------------------------------------------

0 Kudos