UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
542 Views
Registered: ‎10-03-2018

FPGA ethernet with MDIO configuration

Jump to solution

Hiiiii,

Is there any core available to implement SGMII ethernet interface with MDIO configurtion....?

 

0 Kudos
1 Solution

Accepted Solutions
Contributor
Contributor
275 Views
Registered: ‎10-03-2018

Re: FPGA ethernet with MDIO configuration

Jump to solution

Hi...

I was implemented a ethernet interface with AXI ethernet subsystem instead of using 

Tri-mode Ethernet MAC and  SGMII PCS/PMA IP. 

MDIO access did with seperate macro.

 

Thanks for your support

Murali 

 

0 Kudos
3 Replies
Voyager
Voyager
462 Views
Registered: ‎02-01-2013

Re: FPGA ethernet with MDIO configuration

Jump to solution

There's a Tri-mode Ethernet MAC IP (with MDIO) that supports GbE:

https://www.xilinx.com/products/intellectual-property/temac.html

The MAC could connect to the SGMII PCS/PMA IP:

https://www.xilinx.com/products/intellectual-property/do-di-gmiito1gbsxpcs.html

to interact with a transceiver.

-Joe G.

 

0 Kudos
Contributor
Contributor
373 Views
Registered: ‎10-03-2018

Re: FPGA ethernet with MDIO configuration

Jump to solution

Hiii,

What about AXI 1G/2.5G Ethernet subsystem IP for my requirment....?

please guide me to implement the interface...


regards

Murali

0 Kudos
Contributor
Contributor
276 Views
Registered: ‎10-03-2018

Re: FPGA ethernet with MDIO configuration

Jump to solution

Hi...

I was implemented a ethernet interface with AXI ethernet subsystem instead of using 

Tri-mode Ethernet MAC and  SGMII PCS/PMA IP. 

MDIO access did with seperate macro.

 

Thanks for your support

Murali 

 

0 Kudos